How to download videos on Tumblr

To download the video on Tumblr, we can do it right through many online video download sites, or download Tumblr video on Chrome.

Tumblr is also a social network that many users use alongside Facebook, Twitter or Instagram. With Tumblr users can also share their photos, videos or any posts on this social network. But on Tumblr there is no video download option, so users need to use the way to download videos such as download videos on Twitter or download videos on Instagram. The article below will guide you through how to download videos on Tumblr.

1. How to download Tumblr videos online

There are loads of free Tumblr video downloads, with loads of quick and easy downloads. First of all users need to get the Tumblr video link

Step 1:

Click on the video you want to download and click on the top right corner. View post of the post as shown below.

Step 2:

You will then be directed to the Tumblr video post view and above the video URL.

1. Video Downloader download video Tumblr

Step 1:

Users to access the link below to download the video Tumblr.


You then enter the video URL Tumblr you want to load into the page’s interface, select the video format you want to download.

Step 2:

Scroll down to see the video you want to download, right-click on the blue text and select Save Link As….

Videos will be saved to the computer in mp4 format.

2. Locoloader download Tumblr video online


This site supports downloading videos on many sites like YouTube, downloading Vimeo videos, downloading Facebook videos, or downloading audio on SoundCloud, ..

We also enter the video URL Tumblr into the page interface and display 2 video download link below, with different quality. Locoloader also supports downloading audio from video if the download link.

3. Download the Tumblr video on TubeNinja


You also enter the video URL into the stage and click the Download button next to it.

The results below will show two sizes and different video load.

2. How to get Tumblr video on Chrome

If you do not want to use these services, you can do so on Chrome to download Tumblr videos.

Step 1:

First, users should also access the video and then right-click and choose Test, or press Ctrl+Shift+I.

Step 2:

Display the developer interface on the right side of the screen, click the Network item as shown.

Step 3:

You wait a second to display the video link on Tumblr. If you do not currently can press Ctrl+R to reload or turn off the interface and restart from scratch. Immediately display mp4 video link to download.

Right click on the file name and select Open in new tab.

Step 4:

Then the video will open in a new tab. Click the vertical dot icon at the bottom of the video and click the Download button. Tumblr video will also be downloaded to the computer soon after.

Above are some ways for users to download videos on Tumblr. We can use online services, or with a computer, through the Chrome developer interface.

Fix Err-Connection-Refused and Err_Connection_Closed Errors on Chrome Browser

Sometimes in some cases when you are visiting some Web sites on the Google Chrome browser, you receive some error messages such as err_connection_refused, Err_Connection_Closed, and inaccessible.

There are several possible reasons for this connection failure, either because of a DNS problem, a proxy server problem, or a browser connection failure.

To fix this, you can apply some methods such as clear browser cache, check proxy settings and disable firewall.

Part 1: Err_Connection_Closed bug fixes on Chrome browser

1. Use Command Prompt

Open the Command Prompt by right-clicking on the Desktop and holding down the Shift key and clicking the Open command windows here.

Enter the following command and then press Enter:

netsh winsock reset

Open your Chrome browser and check for errors. If the error persists, enter each of the following commands and press Enter:

ipconfig /release

ipconfig /renew

ipconfig /flushdns

ipconfig /registerdns

After the above commands have finished executing, reboot your system. These statements are used to clear your system cache and to connect to the ISP.

2. Clear your browser cache

1. On the Chrome browser window, click the 3 dashboard icon in the top right corner and select Settings.

2. Next on the Settings window, scroll down to find and select the Advanced Settings option.

3. On the Advanced settings page, click the Clear browsing data option. This time a popup window will appear on the screen.

4. At this popup window click Cookies and Plugin Data and Cached Images and Files, then click Clear Browsing Data to continue the steps.

5. Finally, check for errors on the Chrome browser.

3. Assign the IP address manually

If you have applied the above solution and still do not fix the error, you can apply the final solution is to assign IP address.

1.Right-click the network icon in the system tray, select Open Network and Sharing Center.

2. Next click on your network connection.

3. At this point, a popup window appears, click Properties.

4.Next select Internet Protocol Version 4 (TCP / IPv4) and then click on Properties.

5.A new popup window will appear on the screen, where you will select the following DNS server addresses, then enter the following values:

  • Prefer DNS Server:
  • Alternate DNS Server:

Do not forget to select Validate Settings Upon Exit and click OK.

6. Finally open the Chrome browser and see if the error still appears?

Part 2: Fix err_connection_refused

1. Clear the Chrome browser cache

The expired Chrome browser cache may be a reason for blocking the Web site you want to visit. To fix connection refused, you should proceed to clear all cache on Chrome browser.

To clear the cache on your Chrome browser, type chrome://settings/clearBrowserData in the Chrome browser address bar, then press Enter.

At this point, the screen appears Clear browsing data. Here you can select the two options Cookies and other sites and data plugins and Cached images and files and then select the button to clear the browsing data.

2. Check the proxy server settings

To check your proxy server settings, go to Control Panel, then click on Internet Options.

On the Internet Properties dialog box, switch to the Connections tab and select LAN settings.

Next, uncheck the option under Proxy server.

3. Disable the firewall or anti-virus software

Sometimes, firewalls or anti-virus programs can block unsafe Web sites so you can not access them.

If you have applied the above two methods that you still can not fix the Connection Refused error, in this case you can apply how to disable the firewall or anti-virus programs.

Go to the Control Panel and select the Windows Firewall, then click the Turn Windows Firewall on or off link in the left pane to disable the firewall.

You can also close or quit antivirus programs on your computer.



If you are experiencing an error ERR_SSL_VERSION_OR_CIPHER_MISMATCH when using SSL, we understand your status at this time. You may be upset, angry. And I guess whoever falls into the situation as you will also react like that. And the article will help you fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH.

Upon learning about this error, the failure to use Google and Mozilla’s RC4 encryption caused an ERR_SSL_VERSION_OR_CIPHER_MISMATCH error. So, there are four feasible solutions to get this error out of your system.

I know you want to fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH right now and that’s why I will not waste your time. But before you get to fix, there are a few things to keep in mind. These are:

  1. If a fix does not work, try the next one.
  2. Some of these fixes are not completely secure as they allow older, less secure protocols.

Solution 1: Enable all versions of SSL/TLS

Note: This step involves allowing older protocols, which may make the web unsafe. Take risks at your own risk.

  1. Open Chrome
  2. Click on the three dots you see in the top right corner
  3. Now go to Settings and search for ‘proxy’ in the search field
  4. You will see the Open proxy settings option, click on it
  5. Go to the Advanced tab
  6. Now mark all SSL & TLS versions
  7. Press the Apply button
  8. Restart Chrome

[Note: Although we offer this solution as a viable solution, I can not stress that this is a dangerous decision. Older versions of TLS and especially SSL exist for vulnerabilities. The better way is to contact the site owner and ask them to update their SSL / TLS settings to support only modern protocol versions. You really should not connect to anything before TLS 1.2 at this point. For clarity, we do not recommend enabling outdated SSL / TLS versions on your browser. For all intentions and purposes, this proposal, as well as Solution 2, is being presented for educational purposes

Solution 2: Disable Web Protection in your Antivirus/Firewall

We can not give you step-by-step instructions for this as they will be different for each firewall/antivirus. You can find what you are looking for on the web site of the provider.

As we did in the first step, here too, you will have to enable all versions of SSL & TLS.

Solution 3: Disable QUIC Protocol

  1. Search for chrome://flags/#enable-quic in the address bar
  2. Disable the Experimental QUIC protocol
  3. Relaunch Chrome

Solution 4: Clear your SSL status

  1. Open Chrome (obviously!)
  2. Click the three dots you see in the upper right corner
  3. Now click Settings
  4. Now go to Settings and search for ‘proxy’ in the search field
  5. You will see the Open proxy settings option, click on it
  6. Go to the Content tab
  7. Click Clear SSL state
  8. Relaunch Chrome

I hope one of these four solutions helped you fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH. If this still does not help you leave a comment below so we can help you


For Google Chrome users, there are very annoying bugs that not everyone knows how to fix. Today we has ERR_CONNECTION_TIMED_OUT or ERR CONNECTION TIMED OUT instructions for this situation.


What does connection timed out mean?

Connect timed out means that the connection exceeds the specified time. Chrome, Chrome, UCWeb default browser will “wait” for about 1 minute since the connection. If the server or the internet has problems and the web site does not return data to the browser, when the timeout expires, the browser will display this error to the user instead of letting the user wait for more.

When we encounter this error, we can not immediately determine whether the error is due to network or error by the website, but by following the steps as guide below you will succeed and access the normal network.

Error due to network

This is a rare occurrence, not a failure. Because our network has a problem, too slow to send and receive requests from the server side of the website. Error ERR_CONNECTION_TIMED_OUT due to a faulty network that will appear when we visit any website, including and Facebook.

How to fix network inaccessibility: Turn off the modem with the power button or directly pull the power cord. After about 30 seconds, open / reconnect the power cord as before. Wait 30 seconds for the modem to receive the network, maybe longer. After that time, visit Google or Facebook to check.

If you still can not access any of the websites, please contact the operator to get back to the testing house.

Error due to website

With this error, we can not do anything else … wait for the site to be restored.

One trick to check whether your website is not is to visit, check another site, enter the website address and press Enter. If you see the message under “is up” means that the website is working normally but you can not go to mean that error by you.


Normally, we should reload the page to fix the error.

At the top left, click the Reload.

If still not successful, here are some ways to fix it.

#1. Checking connection

Check that your device has wired or Wifi connection.

#2. Clear Cache

Click on Customize and Control icon on the top right corner of the browser. No Scroll down and click on “Show advanced settings”. Now under the ‘Privacy’ section click on “Clear Browsing Data’.

#3. Edit the Host file

The error is because the locked hosts file accesses a number of web pages. The hosts file contains the web links that you want to access. Our job is to find the hosts file and delete the URL that is done.

The location of the file is C:\windows\system32\drivers\etc.

Simply, but you can not edit here, I have to copy and edit with notepad.

– You go to Start —> then right click on Notepad —> select Run as Asministrator.

Select YES.

– The notepad window will appear, choose FILE —> OPEN —> select ALL FILE.

– Click HOSTS —> HOSTS NOTPAD window appears.

– You go to LINK CHOOSE —> delete it.

#4. Flush DNS and Reset IP

Now type ipconfig /flushdns and hit enter.

Then, ipconfig /registerdns and hit enter.

Then, ipconfig /release and hit enter.

Then enter ipconfig /refresh and hit enter.

Finally, run Netsh winock reset this command. Hope. It will help you fix err_connection_timed_out.

#5. Disable Firewall

Check your firewall and internet security to ensure your browser is not blocked from accessing the internet. If you have any web page filtering software installed in your system, then uninstall them.

How to Fix “This extension may have been corrupted” by IDM on Chrome

If you can not download the file, catch the video with Internet Download Manager (IDM) on Chrome because the IDM Integration Module extension is faulty, then you can fix the instructions in the article.

IDM is considered a good download accelerator and is very popular. It allows you to download files faster and can catch the video link is very convenient. This download accelerator is available for download on many browsers through the extension called IDM Integration Module.

However, this extension often has many errors. The most common is the IDM Integration Module is disabled, which makes IDM’s download and video capture inside the browser does not work. If it’s Chrome, you can fix it later.

Option 1: Use the repair function of the utility.

– Press the three dot menu button> More tools> Extension or type chrome://extensions/ into the address bar to open the browser settings extension manager.

– Go to IDM Integration Module> click Repair button to fix the error.

You only see the Repair button when the IDM Integration Module fails with the status line This extension may have been corrupted.

Option 2: If the Repair function does not work, try this method.

– Open the IDM Integration Module installation page on the Chrome Web Store.

– Click the Enable this item link and it will immediately fix the broken IDM extension in Chrome.

Then, check out the Chrome extension page and see that the IDM extension has been successfully re-enabled.

Option 3: Uninstall the IDM Integration Module if the error persists.

– You click Remove from Chrome from the IDM Integration Module installation page.

– Click Details> Remove extension> Remove the IDM Integration Module in the Chrome extension management interface to remove.

You can right-click the IDM icon in the toolbar> Manage extensions to quickly access the detailed interface of the IDM Integration Module.

After uninstalling, reinstall the IDM Integration Module from the installation site of the Chrome Web Store or external installer (drag and drop IDMGCExt.crx in the IDM installation directory into the Chrome extension management interface). This way, you can fix the same problem on other browsers.

Method 4: Update IDM

You can also try to update IDM to the latest version to fix the problem. Open IDM> Help> Check for updates. If you are using an older version, it will start downloading and installing the latest version as well as fixing an existing one (like replacing the broken IDM Integration Module).

Method 5: Keep IDM Integration Module is a safe file before Windows Defender

Sometimes the system defender is Windows Defender mistakenly labeled IDM Integration Module as the virus, so the program will quarantine this extension and cause inactivity error. This case was presented by TNS and corrective instructions that you can review in this article.

What is Tampermonkey?

Tampermonkey is an extremely powerful extension on web browsers. We will learn together what it is and how to install it.

What is Tampermonkey?

Tampermonkey is a popular usercript management utility on web browsers. Tampermonkey is used to run the userscript (can also be called Greasmonkey script), the userscript is usually written in javascript to perform one and a certain task

What are Userscripts?

Userscripts are small computer programs made right on your web browser, for example, by adding YouTube download buttons, clearing up your Facebook timeline, or helping you play online games.

Features of Tampermonkey

  • Manage and edit userscripts.
  • Turn your script on and off with 2 clicks
  • Synchronize scripts through Chrome Sync, Google Drive, and Dropbox.
  • Back up and restore via zip or cloud storage (Google Drive, Dropbox, OneDrive)

Install Tampermonkey

  1. You must first install it from the Chrome Web Store. To install, you should use the latest version of Chrome browser. If you are using an older version of Chrome, you can download another compatible version from
  2. From the Tampermonkey page in the Chrome Store, click the blue Add to Chrome button to install the extension. Chrome will ask you to confirm the extension. Click “Add a gadget.”
  3. Once Tampermonkey has finished installing, you will see a confirmation page from the Tampermonkey website and a popup window confirming that Tampermonkey has been added to Chrome.

Install Usercripts

When Tampermonkey is installed, installing userscripts from sites that provide userscripts is simple, listing the sites you can view here.

For example on OpenUserJs, just select the userscript to install and then click the blue “Install” button at the top.

Tampermonkey will display a screen showing you where the userscripts are installed, which web sites can access, its source code, and the warning install scripts only from sources you trust. If you want to install the script, click the “Install” button, otherwise click “Cancel”.

Installing userscripts from other sources does the same. You just need to find the install link for the script. This will be a button or link to a file ending in “.user.js”.

After installing an usercript, you will not notice any changes until you visit a site that runs.

How to install Dark Mode Windows 10

Instructions for installing Dark Mode interface on Windows 10 include: wallpaper, apps, folders, Microsoft Edge, Google Chrome. Dark Mode everywhere!

If you regularly work with a computer, use Dark Mode or Night Light is more eye-friendly. Windows 10, as well as most popular applications and software, support Dark Mode.

1. Dark Mode for applications

Step 1: Right-click on the desktop and select Personalize.

Step 2: Select Color in the left menu, then look to the right side of the Dark. Now the interface of the Settings window will turn black.

Note: To return to the default color, you just need to integrate into the Light is finished.

2. Dark Mode for tiles on the Start, bordered windows

Still in the Color section, you can select colors for Windows (like the colors of the tiles in the Start and the borders of the window) in the Choose your color section.

Here are the colors available in the Windows Colors section, if you do not find the color you like here then click the Custom Color button to choose the color you like.

In this Windows Color category there are additional customizations:

  • Transparency effects (On to enable – Off to turn off).
  • Show the color you choose for the items here (tick to select).

3. Dark Mode for folders

Still in the Color section, click on the High contrast settings.

Select a template of your choice, to match the Dark Mode, you should choose High Contrast Black.

Press the Apply button to save the change, or you can change the color of your choice by clicking on each component to change. Finally click the Save button to save your own template.

And this is the result:

Note: To change the default color for the folder, just select None in the High contrast settings section.

4. Dark Mode computer wallpaper

If you prefer to move the wallpaper to black always select Background in the left menu, then look to the right choose Solid color in the Background section. Next, click on the Custom Color button, then choose black.

5. Dark Mode for Microsoft Edge

Step 1: Click the three dots on the top right corner of the Microsoft Edge browser, select Settings.

Step 2: Click in the box under the Choose a theme select Dark. At this point, the Microsoft Edge browser will automatically switch to black.

Note: To return to the default color, just select Light in the Choose a theme section.

Automatically click captcha, fast adblock with 2 add-ons for Chrome

With only two small gadgets below, you will no longer have to worry about advertising while surfing on Chrome.

Have you ever surfed the web, seen a good movie or downloaded an app but encountered a shortened link? These links are added by users to earn more revenue from other users click on the link. The annoying thing is that you will have to click captcha and verify that you are not a robot. In some cases, the captive ad copy is a frustrating thing when the ad is constantly appearing. However, with the three small gadgets below, ensure your surfing experience will be raised to a new height.

I’m not robot captcha clicker – Automatically click captcha

This is a nice utility if you do not need to click on those annoying captcha. Captcha will be automatically clicked after the site has finished loading.

In order not to need to verify the image, you will need to sign in to your Google account, and then after clicking, the captcha will be verified. This utility will also not double click in 7 seconds.

Readers may download Chrome or any browser using the Chromium source code here.

AdsBypasser – Passively skips ads and eliminates timeouts

This is an indispensable gadget every time you install Google Chrome. As we all know, with most captcha links, after captcha verification, users will have to wait 5 to 10 seconds for the new site to give you access to the original path. AdsBypasser is born to help users move straight to the root path without having to wait, as well as not having to skip the ad.

Experiments show that this utility works with many types of shortened link sites such as,,,, …

To install this utility, you need to install Tampermonkey first, can download here, then visit the following link here and download the full version of AdsBypasser.

If you want to block annoying ads from link shortcuts, then you can install AdBlock Plus, uBlock Origin or Ghostery to completely remove the ads, making the surfing experience smoother.

Here are two useful utilities to save time while surfing the web that I usually install when installing Chrome. Good luck. Admin login, How to find router’s IP address and modem username password IP address (some people mistakenly refer to 192.168.l.l) is the login page that is frequently used in the internet usage of any customer.

Usually you use address when you have Internet problems, Or if you want to change your wifi password.

However, there are also many manufacturers of modems, routers do not use as the default login address as or so sometimes you also attention.

Now we will explain to you why use this ip adress and when to use it.

What is is the IP address, the Internet Protocol acronym. Every computer is like a house, to get to the right place, the houses need to be numbered and the IP is given to do numbering.

This is the concept of evaluating addresses for devices in a computer network. The device may be a computer or a printer but usually it is your modem, your WiFi transmitter. Usually technicians use address as the default address for the network, Modem but still there are some devices selected default address is or some local range Other IPs.

How to access Router login

To access it, you need to connect your modem to the internet via Wifi or LAN port then open new tab in the Web browser like Google Chrome, Microsoft Edge, FireFox and enter the address of the browser tab.

access home gateway

Once you have access to the modem management page, you can change many settings such as QoS (quality management, network speed), DNS, Proxy, LAN, WAN, wifi password change, PPPOE dialing, block wifi access by MAC address or over IP, WPS, DSL, and many other advanced customizations.

For a normal user, you should not change the settings that you do not know because it can cause network disconnection, wrong network configuration that can not transmit wifi or very weak waves.

Why can’t login

Cause not to access the modem address a lot, which mainly causes the wrong access to the IP address of the modem.

Because the login address is not

As noted above, neither Modem line has the address, it can be or any address according to the manufacturer’s settings or has been changed by the previous user ( may be the installation staff). Therefore, you should refer to the IP Address Modem we mentioned above. not default ip

In case of failure to access due to modifications, you should proceed to reset your Modem. But if no knowledge of computer should not do because the reset Modem also means you have to reinstall network, or you can get help from the operator in this case.

Find your router’s IP address

With Command prompt

Press the Windows key and ‘R’ together and type ‘cmd’ then press Enter to open Command prompt. At the prompt type ‘ipconfig’ and press Enter. You will see a list of network adapters in your computer. Browse through the information to find the number next to Default Gateway. This is the IP address of your router.

Default Router IP Address List

Below you can find your router’s IP address. Once you know which is your router’s gateway, type it into the address bar. You will then have to introduce your user and password login credentials.

In case of wrong password is not rare because in addition to the default password, the installer has the right to change the password under the name of your contract. In this case, if you can not login with the default password, call the operator’s help desk as well as avoid resetting the modem.

The wrong password

Some modem lines have a lot of changes and do not follow the defaults.

So you need to know the username password.

Because the system has multiple transmitters

You will not be able to access of the Modem you are using if you are an extra device, not the sum and your network also has many WiFi Modem connected. At this point your IP address will be automatically allocated under Total Modem. And to resolve this situation you just need to disconnect from the net to access

Of course we usually do this to change the WiFi password or reset our WiFi Modem in case of need and then reconnect.

Default Router username and password 

Below is a list of account names, passwords and IP addresses to access the modem of the network for you to simplify the search. change password wifi

Change wifi TP-Link password

Step 1: Access the default router address, then enter admin and password.

Step 2: Then click on Login. The configuration window starts to appear. Look in the left pane, click on Wireless -> Wireless Security. In the Password field, enter the Wifi password you want to set and click Save.

Step 3: Now click on System Tools, select Reboot and click on Reboot to restart the network.

Change wifi LINKSYS password

Step 1: Install Modem with PC and open IE browser to enter address (the default address of the device)

Here you enter the Username and Password is the default admin and admin and then Enter (Case sensitive).

Step 2: Switch to the Wireliess tab, where you can rename the wireless network in the Wireless Netword Name (Figure 2).

Step 3: Switch to the Wireliess Security tab, in Security Mode you can select the appropriate encryption technology, this article we choose WEP (you can choose WPA or WPA2 according to your needs) , then enter the password and select Save Settings (Figure below).

Change wi-fi Tenda password

Step 1: Install Modem on your computer and then open your browser (IE recommended), then automatically go to Tenda’s installation page. If not, please enter the address, then click Advance Settings.

Step 2: Go to the WAN/WAN Settings/Wireless Basic Settings tab to enter your network name in the SSID (see below).

Step 3: Switch to Wireless Security tab to set the password for Wifi network, you need to set some of the following options:

– WPS: Set Disable

– Security Mode: Mixed WPA / WPA2 PSK

– WPA Algorithms: TKIP & AES and enter your password in the box below.

Finish click OK (Figure below)


Fix ERR_CONNECTION_RESET error on Chrome browser

If you encounter ERR_CONNECTION_RESET in Chrome when browsing a few web pages, this means that the browser can not establish a stable connection or absolutely do not have a website you want to open. While some sites open well, others show this error. Connection reset means that when the data is received by the peer computer, in this case, you can not handle it. This post will show you how to fix error 101, ERR CONNECTION RESET in Google Chrome browser on Windows 10/8/7.


When you see this error message, you’ll also see the following message:

This website is not available, The connection to was interrupted, Error 101 (net:: ERR_CONNECTION_RESET): The Connection was reset

Here are our suggestions on how you can fix it. Make sure to reload the page after each change you make to find what’s right for you. As usual, I will split the troubleshooting steps into two. First for PC and second for Chrome.

Troubleshoot PC network problems

1] Check your network cable, restart the router and reconnect

Basic tips, but sometimes the cause of the problem. Make sure you check that your cable is properly connected to your computer or router. If you connect via WiFi, be sure to restart your router once. Finally, you choose to forget the WiFi you have connected and then reconnect.

2] Delete Proxy:

  • Hit Windows Key + R and enter “inetcpl.cpl” and hit enter to open Internet Properties.
  • Next, go to the Connections tab and select LAN settings.
  • Uncheck Use a proxy server for your LAN and make sure to select “Automatically detect settings”.
  • Click Ok then Apply and restart your PC.

If you are using a third-party proxy service, please disable it and try again.

3] Delete DNS and reset TCP/IP

Sometimes the site does not work because the DNS in your computer still remembers the old IP. So be sure to Flush DNS, and Reset TCP / IP.

To FlushDNS, run the following cmd command:

ipconfig /flushdns

To reset TCP / IP, run the following command on CMD:

netsh int ip reset resettcpip.txt

4] Increase MTU (Maximum Transmission Unit)

Speed ​​up internet also helps. Here, it means you can increase the MTU (Maximum Transmission Unit), RWIN (TCP Window Receive) parameters.

  • Go to Settings> Network & Internet> Ethernet
  • Note Active Wireless / Wired Network Connection, such as Ethernet
  • Open cmd with administrator privileges.
  • Type the following command in CMD and press Enter:
netsh interface IPv4 set subinterface “Ethernet 4” mtu=1472 store=persitent

5] Disable the AppEx Network Accelerator feature

AppEx Networks Accelerator is known to slow down network connections. Many people report that it slows down the network speed by 70% to 80%. It’s best to disable this feature.

  • Go to Settings> Network & Internet> Ethernet> Change adapter options.
  • Right-click your network and select properties.
  • Find AppEx Networks Accelerator and uncheck it.
  • Save and exit to see if the problem is resolved.

6] Delete WLAN configuration (When connected to WIFI network)

When you connect to many networks, all of them are stored on your PC. Next time you reconnect to that network, it will automatically connect. It is possible that one of the networks has been changed, and it is not connected properly, or it may be disconnected from the network. It is best to delete all WLAN profiles and start new ones.

7] Reinstall the Network Adapter Drivers

If deleting WLAN configuration does not work, it is possible that the network drivers are corrupted. You will need to re-install the network adapters and reinstall the network drivers for best results. Windows Update will immediately download the driver and install the new driver.

8] Disable WiFi Miniport

Hit Windows Key + X and select Command Prompt (Admin).

Type the following command in cmd and press Enter after each command:

netsh wlan stop hostednetwork
netsh wlan set hostednetwork mode=disallow

Exit the command prompt then press Windows Key + R to open the Run dialog box and type: ncpa.cpl

Press Enter to open Network Connections and find Microsoft Virtual Wifi Miniport and right-click and select Disable.

Fix Chrome issues

I would suggest a few things here. This will ensure that if there are any malicious software or installations that are restricting the network, it will be handled.

1] Start your browser in Safe Mode

Just like Windows Safety Mode, Chrome also has Safety Mode where Run Mode does not have any user settings and extensions. You can run it manually or just use the keyboard shortcut to launch Chrome in Safe Mode and see if your issue is resolved.

2] Run the Chrome Cleanup Tool

Run the Chrome browser’s built-in cleanup and malware scanner. It helps you remove unwanted ads, pop-ups and malware, Extraordinary Startup pages, toolbars, and anything else that destroys the experience by hitting the webpage by overloading. pages with memory requirements.

Type in the address bar:


3] Reset Chrome settings

This option is similar to Reset Windows 10. When you reset Chrome, it will return to the default settings during the new installation. It will disable all extensions, extensions and themes. In addition, the content settings will be reset. Cookies, cache, and site data will be deleted.

Let us know which solution works for you to resolve the ERR_CONNECTION_RESET error in Chrome.


How to delete Gmail password saved on Chrome

Gmail passwords are usually automatically saved on Chrome. This trick helps users to log in quickly, using Gmail quickly with personal computers. If you use a public computer, borrow a computer to sign in Gmail, then you should delete the Gmail password stored on Chrome immediately after login.

The Google Chrome Lockfeatures allow users to save passwords in the browser. Your Facebook account, Gmail, or other web sites are logged when you log in. If you use a shared computer, laptop, or public access, you should delete the Gmail password stored on Chrome and delete other account passwords. Because Gmail is lost, it pose serious risks to users. Do the right way to delete Gmail password saved on Chrome to feel secure when visiting the site offline.

How to delete Gmail passwords stored on Chrome

Step 1: On the Google Chrome interface hit the 3 dots icon. Go to Settings.

Step 2: Scroll down to the bottom of the Settings section. Click on Advanced.

Step 3: In the Advanced section, note the password and the form. Click on Password Management.

Step 4: If you do not see the Gmail password stored in the Saved passwords section, then select

Once you have logged in again, click on the Google Account and click on the Closed button.

That’s it, you’ve deleted the Gmail password saved on Chrome successfully.

Following the steps above, you will delete Gmail passwords stored on Chrome. Be sure to copy or remember these passwords before deleting them, as you will not be able to retrieve the deleted passwords on Chrome.

In addition to deleting the Gmail password saved on Chrome, Chrome, Google Chrome browser has many other features. Here are six features that Google Chrome should know. Once you understand these features, it’s easier for people using Google Chrome to navigate your browser. Of the six features that use Chrome should know the lock Google Chrome password is quite interesting. Users using this feature will prevent others from opening your Google Chrome browser.

Enable the Dark mode for Google Docs

Today, dark backgrounds (or dark background interfaces) are becoming a trend for developers to add applications and services to their products. Even big companies such as Microsoft or Apple have started updating this mode to their latest operating system products. There’s no denying the benefits of a darker background, and applications and services will use less power (especially on batteries), and your eyes will look better and less eye strain when working on them. night,…

With Google’s products, apps, and services, dark backgrounds appear very little. Therefore, to be able to add this mode to Google’s applications and services, users need to rely on the help of third-party utilities. And in this article, we will try out Darkdocs, a Google Chrome extension that provides a dark background for the Google Docs service. As follows.

Start the Google Chrome browser on your computer and visit this address, then click on the “Add to Chrome” option to install Darkdocs for your browser.

Once installed, the icon for the Darkdocs extension will appear in the Chrome extensions area.

Now restart your browser and access the Google Docs service, open the document or new document, then you will see the Google Docs interface completely switched to dark background.

Full screen editing interface Google Docs with dark background.

When drafting documents.

Although there are still some places that are not really “dark”, but it is also worth trying. Hope this article will help you.

Site search opened in incognito browsing mode

History Search is an extension that remembers and saves visited web pages, including in incognito mode, that you can easily manage and access.

All modern browsers have a browser history manager for you to review your open web pages. History Search is also possible, but more special when keeping all web pages open in the browser, even in incognito mode. In it, you can easily find that website based on a word on the site that you remember. Your browsing history is accessible from any browser and on any computer through sync on your account.

History Search supports multiple browsers. Please click here or the link below to install this extension.

Using History Search, you need an account. Click the gadget icon in the toolbar > Sign up > make a registration by email address or login using your Facebook account. If you sign up by email, you activate the account in the email enrollment.

From now on, the gadget will keep the entire site you visit. To manage your open web pages, you have two options:

1. Interface utility:

Clicking the History Search icon will see all the web pages that have been opened. The gadget has a set time for each site to open. If you want to find a website in the list, just enter the keyword containing any word on the site into the Discover anything box . This is a special feature of the utility, the results will make you happy.

You can filter results by time by clicking the icon at the bottom of the search box> moving the slider. You can see the results displayed in a list or a domain name.

On each saved history, you can mark favorite (star image), preview web page image (eye), copy URL ( Copy ), delete. The utility provides a shortcut for you to turn off site preview ( Space ), open multiple web pages ( Ctrl + press select ). Bookmarking sites like, you can manage in the card with star icon.

2. On the History Search page:

You are here when you are logged in> Show All History to view your browsing history as a list or domain. From the search interface, you can search the site as above. Alternatively, you can access it by pressing the menu button in the utility interface> Web Access.

3. Other functions:

On the History Search page, you can use some of the other features of the utility.

– Import browsing history: You can save your browsing history before installing the widget. Touch Settings> Search> Import previous search.

– Blocking to save: If you do not want to keep a webpage, you can set it up for non-saved browsing when accessing the website domain. Click on Settings> Filters > enter a web address into Type or paste a URL …

For example, or

You can block subdomains by adding *

For example, * Or * .google. *

– Add a site to your favorites: Right-click on the site> History Search> Add to Favorites .

– Add a site to the air navigation list: Right-click on the site> History Search> Add to Blacklist .

– Extract: You can extract browsing history to csv by going to Settings> Control> Export .csv.

Note: The free version, you have stored up to 30 thousand web pages.

Download non-Watermark image ShutterStock on Chrome

If you are a person or a habit to view photos on ShutterStock with beautiful photos by topic, then you definitely want to download them as desktop wallpaper. However, ShutterStock does not allow downloads, or is loaded but must come with Watermark. Today, will help you fix that.

Extension free download photo on ShutterStock is shared by Phan Tuan – member J2TEAM. Since this is a tool that is written and packaged as an extension, you can install it easily on Chrome and Cocoa, with a few simple steps:
Step 1: Download and unpack the extension at the link below:

Step 2: Access chrome://extensions/, choose developer mode then click Load unpacked.

Step 3: Find the folder that contains the files you have extracted. Then click OK.

Step 4: Turn on the Nohat.SE extension as shown below:

Now we go to Shutterstock to download any content offline. Then click on Tai Ve May .

Click Find Download Link to get link download tool.

Here are the results:

Now you can download HD quality images without the shutterstock watermark. Good luck!


Whenever I am trying to browse the Internet, I get many kinds of errors. Sometimes, it’s because the Internet connection is not working properly. Or sometimes your IP address may be blocked by some web sites that are inaccessible to us. This may also happen because the site or service you are trying to access does not support the SSLv3 protocol (Layer 3 Security Protocol). Other potential causes of this error are some third-party programs such as your antivirus or your browser’s extension settings that may disrupt your connection to the site. . It may be due to many reasons. An error when you try to access YouTube or any other site using your Google Chrome browser is:

This site may not be reached, The webpage may be down or down. may have permanently moved to a new web address, ERR_CONNECTION_ABORTED.

Before trying any possible fix, try accessing the same site from another browser and preferably another one. Trying to access web pages from your browser in Incognito mode may also be helpful.

However, if you still encounter this error, here is what you can do to fix it. First, make sure you have created a System Restore Point, in case something goes wrong and you need to fix it.

1. Turn off SSLv3 in Google Chrome

To do this, you will need a Google Chrome browser shortcut on your Windows Desktop. If you already have a shortcut to the Google Chrome browser on your Desktop, skip the next 3 points.

To do this, navigate to the following link:

C:\Program Files (x86)\Google\Chrome\Application\

Then, right-click on Chrome.exe and click on Send to> Desktop (Create Shortcut). This will create a shortcut for the Google Chrome browser on your desktop, if it is not already there.

Right-click the Google Chrome shortcut on your desktop and click Properties. Now, navigate to the tab labeled Shortcut.

In the field labeled Target replace everything in the following text (to copy text select new tab open in the frame):

C:\Program Files (x86)\Google\Chrome\Application\chrome.exe” –ssl-version-min=tls1

This will disable SSLv3 on your Google Chrome browser. You can now try to check that you still have access to that site.

2. Disable Antivirus and Firewall

In the System Tray in the right corner of the taskbar, right-click on your Antivirus icon and then click the option that mentions temporarily disabling the anti-virus protection feature. -off your. If prompted, set the anti-virus duration to turn off at your option. You can temporarily disable Windows Defender when using Windows 10. Now you can check whether your issue is resolved.

Alternatively, you can disable the Windows firewall protection feature. This is because Windows Firewall monitors and allows or denyes and connects to or from your computer. Now, you can check back if your issue is resolved.

3. Reset Google Chrome

To reset Chrome browser, make sure that Google Chrome is not running anywhere in the background with Task Manager. Now press the WINKEY + R combination to open Run and then navigate to the following path:

%USERPROFILE%\AppData\Local\Google\Chrome\User Data

Now select the folder named Default and press Shift + Delete and then click Yes for the confirmation prompt you received. After removing the Default folder, open Google Chrome and click the Menu button indicated by three dots in the top right corner. Then, click Install. In the Settings section, scroll down and click Advanced to display Advanced Settings.

Now, scroll down to the Restore settings button on windows defaults and click that button. This will now give you a prompt, click Reset Settings, and this will reset your Google Chrome browser. Now, check that you are fixed.

4. Reinstall Google Chrome

If all of the methods mentioned above are not working properly, the final fix is ​​to reinstall Google Chrome.

First, you’ll have to uninstall Google Chrome completely from your computer with the clean windows app. This should also include all of the rest of the folders with browsing data, user data, and so on.

Your Preferences can not be read on Chrome- How to fix

“Your Preferences can not be read. Some Features may be unavailable and changes to preferences won’t be saved” when Chrome browser profile fails or malicious extensions are installed on your Chrome browser.

To solve this problem, please refer to the article below of the network administrator.

Fixed “Your Preferences can not be read” on Chrome browser:

To fix ” Your Preferences can not be read ” on your Chrome browser, follow these steps:


Before you take the steps to correct your “Your Preferences,” you should back up your bookmarks on your Chrome browser.

Step 1: Recreate the Chrome profile folder


You must enable hidden files to perform this process. To activate the hidden files, follow the steps below:

– Go to Start => Control panel => Folder Options and click the View tab.

Here you select the Show hidden files, folders, and drives option and hide the Hide protected operating system files option , and then click OK.

1. Close your Chrome browser.

2. Navigate the path below, delete (or rename) the User Data folder:

– On Windows 8, 7, or Vista:

C:\Users\\AppData\Local\Google\Chrome\User Data

– On Windows XP:

\Local Settings\Application Data\Google\Chrome\User Data

3. Open your Chrome browser to check for errors.


When Chrome starts, the browser will automatically create a new User Data folder.

4. Restore the bookmarks file is finished.


How to Always Start Chrome, Safari, IE, Firefox in Private Browsing Mode

One of the best ways to protect your privacy while surfing the web is to use incognito mode on your browser. When a user surfs in incognito mode, all history, browsing, browsing, cookies and personal data will not be saved. This is necessary when we use the same computer.

If you regularly use incognito mode when browsing the web, you can set your browser to always open in incognito mode without pressing the startup key combination. However, when using this mode, the account login on the website will not be saved, and we have to log in the next time.

1. Always browse the web in Google Chrome incognito mode:

To set up always browsing in incognito mode on Google Chrome, users will add an additional command to the shortcut that is used to open the browser.

Step 1:

At the screen interface, right-click on the Chrome browser shortcut and select Properties.

In case you choose a shortcut from the taskbar, right-click the Google Chrome icon on the taskbar, then right-click Google Chrome in the menu and select Properties.

If you choose from the Start Menu on Windows 10, right-click on the Google Chrome icon> More> Open file location and then right-click on Google Chrome in the Programs window and select Properties.

Step 2:

Display the Properties dialog, where we will add “-incognito” to the end of the Target box as shown below. Then click OK and grant administrative rights if applicable to complete the change.

As such, when you open the Chrome browser, incognito mode is started. In case you want to access the browser in normal mode just delete the “-incognito” in the Target added before that is.

2. Default browsing anonymously Firefox:

Firefox has an option for users to set up web access in incognito mode, without having to make changes to Google Chrome.

Step 1:

First boot the Firefox browser. In the main interface, click the icon 3 dashes and then click Options (Options).

Step 2:

Switch to the new interface, here click on the Privacy tab . Look at the right side select the next item Firefox will (Firefox will). Here users will switch the default setting to Never remember history (Never remember history).

Soon the browser will ask the user to restart for the change to take effect.

As such, Firefox will use the same settings as when using private browsing mode, while the interface is exactly the same as the regular web browsing interface.

To turn off this option, do the same for the steps above but select Remember history.

3. Browse anonymously on Apple Safari:

The Safari browser also has a built-in option to always start in incognito mode on Firefox.

Step 1:

First, click on Safari and select Preferences.

Step 2:

Switch to the new interface, click on the General tab. In the Safari opens with section,switch to A new private window in the drop down menu.

To disable this feature, we switch back to the default A new window setting.

4. Open incognito mode in Internet Explorer:

With Internet Explorer, we also need to activate the command in browser settings.

Step 1:

We first click on the Internet Explorer icon on the desktop and select Properties.

Step 2:

Appears the Properties dialog, where Target will add “-private” at the end of the line. Finally click OK to save the setting.

To return to the normal browsing mode simply delete the “-private” section previously added in the Target section

Here’s how to always set up incognito mode on Chrome, Firefox, Safari, and Internet Explorer. With the Microsoft Edge browser, you can use the automatic removal of browsing history when exiting the browser that the Network Administrator has instructed you to read.

How to download Images from Flickr

Flickr is one of the largest and most popular online photo hosting services today. Therefore, the demand for users to download photos from Flickr is also increasingly popular.

It’s just like social networking sites that share photos online, and although Flickr’s connectivity is not as good as Instagram, it’s a huge photo gallery, with millions of beautiful photos, quality and lots of them. If you are also looking to download photos on Flickr, read this.

Flickr also does not allow users to download photos from their archives, but we still have some tips for doing so. And unlike when you download photos on Instagram, we have a lot of ways to get photos from Flickr to the computer. This article will teach you some of the simplest and easiest ways to do this.

Download photos on Flickr to your computer using Chrome

No. 1 web browser World Google Chrome always has a lot of extensions to support the needs of computer users. One of them is the Flickr Photos Download – extension, which is made specifically for people who want to get photos on Flickr.

Just visit the Add-ons Store to install Flickr Photos Download for Chrome by clicking Add to Chrome.

To use this utility, you only need:

Open the image you are loading on Flickr

Left-click on Flickr Photos Download icon on Chrome.

A list of the different image sizes will appear, choose a size you need to use and click on the corresponding downward arrow icon to upload the image.

Now a Windows window appears, you just select the location saved on the computer and name it and click Save.

Download photos on Flickr with Flickr Downloader

Flickr Downloader is a specialized software, whose main purpose and purpose is to help users upload photos from this online photo sharing service. Proceed as follows:

Step 1: Download and install Flickr Downloader on your computer.

Step 2: Take turns:

  • Open the photo on Flickr, copy the path
  • Launch Flickr Downloader, paste this URL into Flickr URL
  • Select the location to save the image on your computer by left-clicking on Browse (or by default).
  • Click Download to start downloading

The process of downloading images is shown through the progress bar and Download Log below. You can click Stop to stop this process at any time.

One advantage of this software is that it captures the user’s emotions, which is the ability to download multiple photos at the same time. Users can choose to download individual images according to the above instructions or download the same page at the same time.

As in this illustration, the writer is loading a photo page with the subject ‘sunset’ from Flickr on the computer. 

Or alternatively, when we launch the software, the Download item will automatically appear below the image we are opening. Want to download it, just click on this icon and select the image mode that you are using.

If you own a Flickr account and do not know how to download photos on this online storage service hope the tutorial above gave you the answer.

How to Pin Websites to Start Menu in Windows

Instead of having to bookmark important Web sites, then access bookmarks to open pages, you can pin a Website to the Taskbar for easier access, time-consuming.

Pin the Edge site to the Start menu

To pin a webpage in Edge, just open the page, click Menu and select Pin this page to Start.

This will create a shortcut to the site in the Start menu of Windows 10. If you want to delete it then right click on the shortcut and select Unpin from Start.

Pin the Chrome web page to the Start menu

  • First, you need to visit the website you want to add to the Start menu in Chrome and create a shortcut in the Bookmarks bar.
  • In the Chrome browser, open the Chrome Apps page by typing chrome://apps in the address bar.
  • Drag the newly created bookmarks (bookmarks) to the Chrome Apps page.
  • Right-click on the newly created Chrome application and select Create shortcuts.
  • Select Desktop and Start Menu and click OK.
  • Find that site in the Windows Cortana tool.
  • The webpage created will be displayed as an app in the search results. Right-click on it and select Pin to start.

You should now see the Chrome icon in the Start menu and just click on it to open the webpage you have pinned.

Note: You can rename the shortcut by right-clicking the application icon and selecting Open file location. The Windows Explorer window will appear, find the shortcut in the Start menu application list here and you can rename the shortcut as you like.

Do you like pinning applications in the taskbar or the Start menu more and find a more convenient way?

How to block websites on Chrome

Sometimes we get in trouble with some sites that frequently appear in search engines on a browser. This is annoying and annoying to many users. So how to block these annoying sites? Very simply, with the help of the Chrome browser extension, we can now block those sites easily.

1. Personal Blocklist

The simplest option to help you block websites from appearing in the Google Search results is Personal Blocklist – an extension provided by Google.

When you install this add-on, you’ll see an option below the Google Search results to Block the domain of that search result. Click that and the site you choose will no longer appear in the search results. If blocked sites appear in search results, you’ll see a message at the bottom of the page indicating that they will not appear because you’ve blocked them, and you can click on the option to display them.

To manage blocked sites, just click the Personal Blocklist extension icon in the Chrome toolbar and you’ll see all of your web pages there.

2. Block Site

The best thing about Block Site is the authentication option. Once you have configured the blocked site list, you can add a password to the Settings page so children can not access and undo what you have blocked.

Once you’ve installed the extension, open the add-ons settings and add the sites you want to block. Check the Enable Authentication box  and enter a password to block access to the settings.

3. StayFocusd

StayFocusd is also one of the best Google Chrome site blocking features. We spend a lot of time browsing Facebook and other entertainment websites so this utility will help you focus on the main job better.

You can specify the date StayFocusd restricts browser activity along with the time each day you spend on time consuming sites. In addition, you can create a list of blocked sites or allowed sites. Another useful feature in this utility is the  Nuclear Option. This feature restricts access to any blocked sites. Furthermore, you can specify how many hours you want to block access.

How to Quickly Leave multiple Facebook groups you don’t need

A problem when we use Facebook is to see the information from the group that you do not follow or care. So what is the solution to Quickly Leave multiple Facebook groups you don’t need?

Option 1: Simple way

Step 1: Go to Groups Settings

If you use Facebook on a desktop browser like your desktop or laptop, just log in to the account you want to log out of. After visiting the Facebook homepage, in the left hand side of the screen you find Groups and click on.

Step 2: Move to group list

After clicking on Group, you will see a lot of groups appear on the screen, pull down you will see your Group has joined, now a list of groups will be listed, you can easily know. Which group did I join to easily break out of the group.

Step 3: Leave the group

Now just find which group you have no need to stay in. Click the Gear icon> select Leave this group.

Option 2: How to Quickly Leave multiple Facebook groups

Many times you are also being added to groups by tools on Facebook.

Don’t worry, we will leave unwanted groups with just one click.

Step 1: Download and install FB Toolkit by PlugEx here.

Click Add to Chrome, then click Add extension.

Step 2: Access your Facebook and click the Toolkit For FB icon by PlugEx in the right corner.

In the Removal tools section, click LEAVE MULTIPLE/ALL FACEBOOK GROUP.

Step 3: Click on SELECT ALL GROUPS to select the whole Group. Or select the group you want to quit. Then click START LEAVING GROUP FACEBOOK.

Step 4: Wait.

The result will appear as shown below, the words Un-joining groups completed that you have been successful.

It’s simple, right! Now you will not have to be bothered to look at the information stream of the group that I have not watched or do not care anymore! Good luck to you.