Whenever I am trying to browse the Internet, I get many kinds of errors. Sometimes, it’s because the Internet connection is not working properly. Or sometimes your IP address may be blocked by some web sites that are inaccessible to us. This may also happen because the site or service you are trying to access does not support the SSLv3 protocol (Layer 3 Security Protocol). Other potential causes of this error are some third-party programs such as your antivirus or your browser’s extension settings that may disrupt your connection to the site. . It may be due to many reasons. An error when you try to access YouTube or any other site using your Google Chrome browser is:

This site may not be reached, The webpage may be down or down. may have permanently moved to a new web address, ERR_CONNECTION_ABORTED.

Before trying any possible fix, try accessing the same site from another browser and preferably another one. Trying to access web pages from your browser in Incognito mode may also be helpful.

However, if you still encounter this error, here is what you can do to fix it. First, make sure you have created a System Restore Point, in case something goes wrong and you need to fix it.

1. Turn off SSLv3 in Google Chrome

To do this, you will need a Google Chrome browser shortcut on your Windows Desktop. If you already have a shortcut to the Google Chrome browser on your Desktop, skip the next 3 points.

To do this, navigate to the following link:

C:\Program Files (x86)\Google\Chrome\Application\

Then, right-click on Chrome.exe and click on Send to> Desktop (Create Shortcut). This will create a shortcut for the Google Chrome browser on your desktop, if it is not already there.

Right-click the Google Chrome shortcut on your desktop and click Properties. Now, navigate to the tab labeled Shortcut.

In the field labeled Target replace everything in the following text (to copy text select new tab open in the frame):

C:\Program Files (x86)\Google\Chrome\Application\chrome.exe” –ssl-version-min=tls1

This will disable SSLv3 on your Google Chrome browser. You can now try to check that you still have access to that site.

2. Disable Antivirus and Firewall

In the System Tray in the right corner of the taskbar, right-click on your Antivirus icon and then click the option that mentions temporarily disabling the anti-virus protection feature. -off your. If prompted, set the anti-virus duration to turn off at your option. You can temporarily disable Windows Defender when using Windows 10. Now you can check whether your issue is resolved.

Alternatively, you can disable the Windows firewall protection feature. This is because Windows Firewall monitors and allows or denyes and connects to or from your computer. Now, you can check back if your issue is resolved.

3. Reset Google Chrome

To reset Chrome browser, make sure that Google Chrome is not running anywhere in the background with Task Manager. Now press the WINKEY + R combination to open Run and then navigate to the following path:

%USERPROFILE%\AppData\Local\Google\Chrome\User Data

Now select the folder named Default and press Shift + Delete and then click Yes for the confirmation prompt you received. After removing the Default folder, open Google Chrome and click the Menu button indicated by three dots in the top right corner. Then, click Install. In the Settings section, scroll down and click Advanced to display Advanced Settings.

Now, scroll down to the Restore settings button on windows defaults and click that button. This will now give you a prompt, click Reset Settings, and this will reset your Google Chrome browser. Now, check that you are fixed.

4. Reinstall Google Chrome

If all of the methods mentioned above are not working properly, the final fix is ​​to reinstall Google Chrome.

First, you’ll have to uninstall Google Chrome completely from your computer with the clean windows app. This should also include all of the rest of the folders with browsing data, user data, and so on.

DNS Server Not Responding errors on Windows 7/8/10 – How to fix

Errors DNS Server Not Responding is one common error happens on Windows 7/8 / 8.1 and Windows 10. If you encounter this error, you can not connect to the Internet to access the network.

Normally, when you fix this problem with Windows Network Diagnostics, you will receive the message “Your computer appears to be configured but the device or resource is not responding”.

Part 1: Cause of the error

The cause of the DNS Server Not Responding error on Windows 10/8/7 could be due to:

– Network card or router error.

– The DNS service on the computer is interrupted.

– Antivirus programs or firewalls (firewalls) block access to the Internet.

Part 2: Fix DNS Server Not Responding error on Windows operating system

1. Fix the address of Network Address

First click Start and then click Run to open the Run command.

On the Run command, type Network and Sharing and press Enter to open the Network and Sharing Center.

On the Network and Sharing Center window, click Change adapter settings .

Right-click your network, and select Properties.

On the Local Area Connection Properties window, click the  Internet Protocol Version 4 (TCP / IPv4) option  to make the default DNS server change to either Google or OpenDNS DNS.

On the Internet Protocol Version 4 (TCP / IPv4) window, click the Use the following DNS server address option and enter the Google DNS address:

– Preferred DNS Server is:

– Alternate DNS Server is:

If you want to use OpenDNS, you use the address:

– Preferred DNS Server is:

– Alternate DNS Server is:

Select Validate settings upon exit and click OK .

The next step is to open the Command Prompt. To open a command prompt, you click Start => Run , then type cmd.exe on the Run command window and then press Enter.

On the Command Prompt window, type ipconfig /all and press Enter.

Locate and note the Physical Address.

Now go back to the Network and Sharing Center window. Look here and right click on the network you are connected and click Properties.

Next click Configure and select the Advanced tab. On the Advanced tab, find the Network Address and enter the Physical Address you just noted in the previous step.

Note:  Enter Physical Address immediately, no dashes.

For example, if your address is the Physical Address BE-4C-C4-DB-A9-C0 then you enter the frame Value is BE4CC4DBA9C0 then click OK .

Finally, restart your computer to check whether the bug has been fixed.

2. Reset DNS settings

If you have fixed the address of the network address and still can not fix the DNS servererror not responding , you can reset the DNS settings to fix the problem.

First press the Windows + R key combination to open the Run command window. On the Run command, type cmd.exe and press Enter to open Command Prompt.

Next enter each of the following commands into the Command Prompt window:

• ipconfig /flushdns and press Enter.

• ipconfig /registerdns and press Enter.

• ipconfig /release and press Enter.

• ipconfig /renew and then press Enter.

• netsh winsock reset and then press Enter.

Finally, restart your computer to check whether the bug has been fixed.

3. Add Winsock Registries to fix DNS Server not Responding

To fix the DNS server not responding , all you can do is delete the Winsock Registriesthen proceed to add again.

First, you should back up Winsock Registries , then delete the key to avoid it in the event of a bad situation. Next, restart your computer, then add the Winsock Registries that you backed up earlier and reboot your computer.

Follow the steps below:

– First press the Windows + R key combination to open the Run command window.

On the Run command, type regedit and hit Enter.

– The Registry Editor window appears, where you navigate through the key:

HKEY_LOCAL_MACHINE => SYSTEM => CurrentControlSet => Services

– Right-click Winsock and select Export.

– Place any name, such as winsock1.reg and click Save.

– Do the same with Winsock2.

– Now right-click on Winsock and Winsock2, select Delete to delete the Registry.

– Restart your computer.

– Open the Windows Registry Editor again and navigate to the following key:

HKEY_LOCAL_MACHINE => SYSTEM => CurrentControlSet => Services

– Click File => Import.

– Select the Registry that you backed up before and click Open .

– Restart your computer again and check whether DNS server error is not responding or not.

4. Disable NetBIOS

In fact, disabling or enabling NetBIOS may also not affect these issues. In most cases, the cause of the error may be a faulty registry or other configuration files. But if you’re not connected to a corporate network or do not have a Home Network setup, you can disable NetBIOS and try to check whether the DNS server is not responding.

To do this thing:

– Access Control Panel => Network and Internet => Network and Sharing Center .

– Next double click on the network connection you are using to open the Properties window.

On the Properties window, double-click Internet Protocol Version 4 (TCP / IPv4).

– On the Internet Protocol Version 4 (TCP / IPv4) Properties window, click Advanced.

– Check Disable NetBIOS over TCP / IP to fix DNS server not responding .

– Click OK.

– Finally close all windows and check whether DNS server not responding error .

5. Reboot the system

To fix the DNS Server Not Responding  error on Windows 10/8/7, you can try the solution of rebooting the system. No one can be sure that rebooting the computer can fix the problem, but the process is not that difficult, so try it out.

6. Disable the Firewall / antivirus program

Many users reflect that the cause of the DNS Server Not Responding error on Windows 7/8/10 is because the firewall or anti-virus programs block your connection. So to fix the problem you should disable the antivirus and firewall (firewall) on your computer and check whether the error or not.

7. Reinstall Windows

If you have applied all the above solutions and still do not fix the error, the last solution for you is to reinstall Windows to fix the error.

Fixed installation and installation of Microphone in Windows

If a mic connected to this computer does not work it can be a setup problem rather than a problem with the microphone itself.

Follow these steps to check and fix the microphone settings in Windows 10:

1. Right-click on the speaker icon at the bottom right of the screen.

2. Click on ‘ Recording Devices ‘.

3. A list of recording devices will appear. Try saying your microphone, and see if there are any green bars up next to one of them while you talk (as in the screenshot).

4. If you do not see any blue bars go to step 5.

If you see the green bars when you say into the microphone, but it still does not work in some programs, then that means the mic is configured properly in Windows but the program is listening to the recording device false. Try changing the settings of your program.

5. Check that you can recognize which one of the devices in the list are your microphone. If you find it, click on it to highlight it, and then click Set Default.

6. Check if the green bars are rising when you speak into the microphone. If you do your mic now is exactly set. If not, continue to the next step.

7. Double-click the device that represents your microphone. The Microphone Properties window will appear. Click the Levels tab.

8. In the level tab, drag the slider all the way to the right, until the right number says “100”.

9. Click OK .

10. Now check again if you see green bars rising when you speak into the microphone: if you do, your mic is currently configured correctly.

11. If you still do not see any bars, and you are not 100% sure which one of these devices is the one related, try the 5-10 steps for each device in the following list. .

12. If you still do not see any blue bars, left click inside the “Recording” tab and make sure “Show Disabled Devices” has a tick next to it. If it does not click on it to mark it

13. This can add extra devices to the list. Perform steps 5-10 on the device too, until you see the green bars when talking into the mic.

14. That’s it, check it works. If not, try uninstalling your drivers and then letting Windows automatically reinstall them (explained below). This has helped many users.

How to uninstall and then reinstall your micro drivers

1. Device manager open, the fastest way is through the search bar:

2. Open ‘Audio inputs and outputs

3. Left click on your recording device.

4. In the menu that opens, click ‘ Uninstall ‘.

5. Physically disconnect your microphone from the computer.

6. Restart the computer.

7. Reconnect the microphone and let Windows reinstall the driver.

8. If that does not work, or, head over to our forum and we will try to help.

Specific solution for users with IDT High Definition Audio Codec Device

1. Device management open, the fastest way is through the search bar:

2. Open ‘Audio inputs and outputs

3. Double-click on your recording device ” High Definition Audio Codec .”

4. Go to the ” Driver ” tab.

5. Click on ‘ Update Driver ‘.

6. Click ‘Browse my computer for driver software’.

7. Click ‘Let me pickup a list of device drivers on my computer’.

8. Select ‘ High Definition Audio Device ‘, and do not ‘ IDT High Def ‘, and click Next.

9. You will receive a warning. Click on ” Yes “.

10. Check if it works.

Specific solution for users with VIA HD Audio device

Many VIA users are having problems with recording and / or playback since they switched to Windows 10. If you are one of those who try to download and install Daniel_K’s variable driver.

Please note:

It seems that many users who switch to Windows 10 are having microphone problems even after reading this article. If you are one of them, ask your question in our forum, and we will try our best to help you. As we have read more information through the forums, we update this article with tips that are suitable for specific devices.



How to fix “DPC Watchdog Violation” on Windows 10

DPC Watchdog Violation is a blue screen display error on Windows 10, if you notice the DPC Watchdog Violation error on Windows 10 is a common problem encountered during the use of Windows 10. The main cause of the software is incompatible with system or not the latest version.

DPC Watchdog Violation is a nightmare for many computer users, Windows laptop operating system. What is the cause and how to fix DPC error Watchdog Violation? Please read this article through offline.

DPC Watchdog Violation is one of the most abrasive errors on Windows 10 ISO, DPC error Watchdog Violation displays blue error screen. There are many reasons for DPC Watchdog Violation on Windows 10 iso and mainly because drivers come from 3rd row such as Main, Chip or even TouchPad driver on laptop if not updated as often as possible. Causes DPC Watchdog Violation on Windows 10.

  1. Stay up-to-date for your Windows.
  2. Update Drivers for your system regularly.
  3. Turn off the computer properly
  4. Do not force the computer to shut down suddenly.
  5. If you find that any driver is faulty, fix it immediately by updating or reinstalling it.
  6. Always update the intel management tool driver.
  7. Use Defragment Defragment and regular disk cleanup.
  8. Use software or drivers compatible with Windows.


Step 1: To launch and troubleshoot DPC Watchdog Violation on Windows 10 you need to open the Start Menu and type in “device manager” and go to the Device Manager system manager.

Step 2: In the Device Manager, navigate to Keyboard, which will have Driver Mice and other pointing devices. Click on the touchpad and uninstall to remove it.

Step 3: Confirm OK again to delete the driver Toucpad.

Step 4: Turn off Device Manager, open up Start Menu, type in “Advanced system settings” and go to the View advanced system settings.

Step 5: In System Properties, select Device Installation Settings.

Step 6: In the Device Installation Settings section, switch to NO and then Save changes to remove the automatic driver update.

Step 7: Use automatic driver search software like Driver Booster to scan the latest driver.

Select the driver Touchpad again and then download and install offline.

Step 8: After installing Touchpad Driver is complete, restart the computer to complete the installation process.

Then you can use Windows 10 normally, can DPC Watchdog Violation error on Windows 10 will no longer after the work done.

With this tutorial you can fix the DPC Watchdog Violation on Windows 10 as well as completely fix the blue screen error on Windows 10. And remember to regularly update the latest drivers for the missing devices on the computer. of you. Frequent updates help the system interact with better software and drivers. Also prevent Windows Update from crashing because of overlapping drivers.


How to fix 0x80080005 when updating Windows 10

Windows Update is an update on Windows 10, but sometimes it also causes an update on the computer that is not working. Some common errors on Windows Update, when updating on Windows 10 that is error 0x80080005. If we update the computer to the Windows version 10 error 0x80080005, the screen will appear error message to the user is accompanied by the error code. So how to fix 0x80080005 error on Windows Update, error updating on Windows 10?

How to fix update 0x80080005 Windows 10

Error 0x80080005 on Windows Update when updating will be as shown below.

1. Remove the third security program

In addition to the Windows Defender security suite available on Windows 10 computers, users often install additional security programs such as antivirus, antivirus, ransomware detection software, etc. This may be the cause of the status. Error 0x80080005 due to software conflicts with the system.

If after the security software installation occurs, you should remove security programs, programs and other functions on the system.

2. Restart Windows Update

When Windows Update crashes, we can use the Windows Troubleshoot, search engine, and bug fixes that are available on the system to remove uninstalling security software.

Step 1:

You go to Settings> Update & Security> Troubleshoot. Look to the right to Windows Update and then click Run the troubleshooter.

Step 2:

The tool will immediately conduct debugging on Windows Update.

When a tool error is detected, the Fix this fix or skip this fix without any repair. Click Apply this fix to fix the problem on Windows Update.

3. Grant control of System Volume Information

Step 1:

You press the key combination Windows + X and then select Command Prompt (Admin) or Windows PowerShell (Admin).

Step 2:

Then user paste the command cmd.exe /c takeown /f “C:\System Volume Information\*” /R /D Y && icacls “C:\System Volume Information\*” /grant:R SYSTEM:F /T /C /L to interface and then press Enter to execute. Then restart the computer.

4. Reset the BITS service security description

BITS service is the Background Intelligent Transfer Service on the system. If BITS service fails, or is removed from the system, Windows can not check or download new updates for the system. And when Windows updates or checks for new versions, it will also receive an error.

Step 1:

You also hit the Windows + X key combination and select Command Prompt (Admin).

Step 2:

Next, we will type the commands below into the interface. After each command press Enter to execute. You wait a few seconds to execute the old command and then enter the new command into the interface.

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 catroot2.old

net start wuauserv

net start cryptSvc

net start bits

net start msiserver


Step 3:

After entering the full command, we restart the computer to fix Windows Update error on the system.

Here are some ways to fix the error 0x80080005 on Windows Update, the update to the new version for Windows 10 computer. The update Windows to the new computer will help to fix the remaining problems in the old version, Help users experience the latest features.

How to fix Action Center not Working in Windows 10

The Action Center allows you to customize the display of notifications in the right-hand corner of your Windows taskbar. By default, this feature will be open and it will be on. This means that the status will allow you to customize the display of message types.

Step 3:  You look to the right and see if there is a lock called  Remove Notifications and Action Center. If exists and it is status is  Enabled  , you right-click and select the option to lock it  Edit and then transferred to that state is  Not Configured.

2. Manipulate the Registry Editor

Step 1:  Open the Registry Editor by typing regedit on the RUN dialog box

Step 2:  Navigate to the following folders:


Step 3:  Make sure that the right key is the  DisableNotificationCenter key. If so, please delete it. By right-clicking, select  Delete  .


Here is the whole way that I want to introduce to you when your computer encountered the status of Action Center feature  is blurred (disabled). If you have problems then please follow the steps above.

How to fix Connection Failed with Error 651 in Windows 7/8 and 10

If you are a person working directly with a computer, it’s easy to face the Connection Failed with Error 651 at any time. There are many Windows users who are affected by code error 651 while working online.

If you are tech savvy or one of the windows users, you can refer to this article and apply it to the error handling methods that we’ve done from computer technical articles. Please note and note the 651 error fixes in windows 7/8 and 10 for future use. 

Fix Connection Failed with Error 651

Error 651 usually occurs when Windows users try to connect to broadband in Windows 7/8 or Windows 10 operating systems.

When it occurs, it shows that your modem ( or other connected devices) has failed and will normally say ” Connection failed with error 651 “.

In this case, the user tries to restart the computer, router or modem, but you can easily see this problem in windows 7/8 / 8.1 or 10 because the error code 651 is displayed. error when user is working.

Workaround for error 651 in Windows

There are many suggestions and solutions for this problem, but remember that there are no official solutions available online or that will fix this problem for windows 7. I try to gather some specific ways to help you improve the problem. You can apply the fixes below for specific errors that you are experiencing.

Remove Modem

By uninstalling the modem, users can solve this problem faster. This solution is the most common way to get rid of this particular error code. Applicable to all dial-up modems. Many people have solved the problem with this quick method.

Download and update the drivers drivers

Drivers are important for your hardware. You may see Connection Error 651 if you uninstall this driver. SO will go to your hardware’s official website and download the latest ones. If you do not want to carry on the hard work then, the easiest way is to use programs like Driver Agent.

Driver Agent will scan your computer for outdated drivers. It will then show you the list of available update drivers. You can update all the drivers or select from the list. The program is very useful and you can have a system with up-to-date drivers.

Replace  raspppse.sys from the Windows 7 service account

Many users get rid of this problem by replacing the raspppse.sys files from the windows 7 directory. Of course, this will only work for users who are currently using Windows 7. and are facing this problem.

Remove IPV6 for internet

Users can also solve this problem by turning off IPv6 for their dial up modem. This is one of the simplest ways to solve this problem successfully. Right-click Connections , select Properties , then deselect the Internet Protocol Version 6 (TCP / IPv6) box .

Disable automatic adjustment

Very likely the user made this way for his computer. By  turning off the auto-adjust feature to solve this problem. This method is only useful for users who are using a router. To disable auto-tuning follow the steps below.

  • Start the command prompt as an administrator
  • Enter the command below and press Enter

” Netsh interface tcp set global autotuning = disabled”

Reinstall the CARD LAND driver

We have found that by reinstalling the LAN card driver, Connection Error 651 is a problem that can be resolved. Sometimes the drivers may be corrupted and this is why you should reinstall the driver.

Boot Clean Boot

Perform startup Clean Boot in Windows 7/8 and 10 can help users find the root cause of this problem. If there is no problem in your windows service then this method has not implemented the principles and working for your computer.  During booting up your Windows computer, simply press F8 to boot into Safe Mode. When in safe mode the user can fix some problems on the system.

Start up the ADSL modem 

It is possible that your Internet modem may be “hanging” during connection. Removing the dialer and then creating a new dialer can help a lot.

Tips for 651 errors in the future

Once you have fixed this bug, all you need for the next time is to avoid this error as well as other errors that appear in Windows. So we recommend using Pc optimizer tools like Total System Care and frequently use it, it will keep your computer support organized. Registry entries for errors will be fixed, this is the main error of most errors in Windows. 

Fix search does not work on Windows 10

If the search function on Windows 10 does not work then you can overcome the solution that blogtip introduced in the following article.

Compared with the previous operating system, the search on Windows 10 is really good and much more useful. You can find the app, pictures, even information on the web … in a snap with the search function of Windows 10. However, if someday the function does not work (show results) It’s definitely buggy and you use the solutions below to fix it.

I. Turn off File Explorer:

We will lock a key in Registry Editor but before that we need to disable Windows data manager.

Step 1: Open Task Manager with:

– Press Ctrl + Shift + Esc.

– Right click on taskbar> Task Manager.

In the Process tab , navigate to Windows Explorer> right click> End task. Or faster press Ctrl + Shift >right click on the taskbar> Exit Explorer.

Step 2: Open the Run box ( Win + R )>enter regedit> OK to open the Registry Editor.

Step 3: You delete the key under the following path.

– Windows 32-bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\{ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews\{00000000-0000-0000-0000-000000000000}

– Windows 64-bit: HKEY_LOCAL_MACHINE \SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\ Explorer\FolderTypes\ {ef87b4cb-f2ce-4785-8658-4ca6c63e38c6}\TopViews\ {00000000-0000-0000-0000-000000000000}

Step 4: On the Task Manager> File> Run new task >enter explorer.exe> ​​OK to restart File Explorer.

II. Enable Background Apps:

In Windows 10 Creator Update or higher version, there is another common issue that results in inactive search when searching the app which is the option of running background is disabled.

You have two ways to turn it on.

1. Settings:

– Open Settings> Privacy -> Background apps> turn Let apps in the background shaking.

– Or enter background apps in the search box> select which apps will run in the background. It will be the Background apps item in Settings.

II. Enable Background Apps:
In Windows 10 Creator Update or higher version, there is another common issue that results in inactive search when searching the app which is the option of running background is disabled.You have two ways to turn it on.

1. Settings:

– Open Settings> Privacy -> Background apps> turn Let apps in the background shaking .

201x299 - Fixed search errors not working on Windows

– Or enter background apps in the search box> select which apps will run in the background . It will be the Background apps item in Settings.

2018 10 01 16 31 09 354x600 - Fixed search errors not working on Windows

2. Registry Editor:

If you do not see this option, you can enable it in Registry Editor.

– Open the Registry Editor, navigate to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ BackgroundAccessApplications .

– In the right pane of BackgroundAccessApplications , right-click New> DWORD (32-bit) Value > Name GlobalUserDisabled .

– Double-click GlobalUserDisabled , enter a value of 0> OK. Restart the computer.

III. Check Windows Search:

You need to double check the Windows Search service when the search function does not work.

Step 1: Open Run, enter services.msc> OK to open Services.

If you do not see the status of the service, then the search function is disabled. Right-click on Windows Search> Start / Restart to start the service.

Or double-click on Windows Search> select Automatic (Delayed Start) at Startup type in the General tab.

Step 2: Open Control Panel by typing control panel in Run. Go to Indexing Options and click on.

When the Indexing Options interface pops up, you choose the search position does not work, for example, in the Start menu, click Start Menu. Next, click Advanced> Rebuild to rebuild the search index for this location. You do the same thing with other locations.

IV. Using Windows Troubleshooter:

You can use the Windows troubleshooting tool to find errors and fixes when the search function is not working.

– Open Control Panel, find Troubleshooting> View All.

– Click on Search and Indexing> Next.

V. Re-registration of Windows 10 Applications:

This is also a solution to fix the search function on the system when the error.

– Right-click on the Start button > Windows PowerShell (Admin).

– Enter the command line below> Enter .

Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}

– Restart Windows.

File Or Directory Is Corrupted And Unreadable-How to fix

When using USB or other external devices such as memory card, mobile hard disk,… you have encountered File or directory error  is corrupted and unreadable , do not know the cause and how to fix. Today will guide you to fix  this Common file or directory is corrupted and unreadable.

Cause of this error is often encountered when you use external devices such as USB, memory stick or removable hard disk, … suddenly disconnected shock, or due to electrical impulse …

“File or directory is corrupted and unreadable”

Step 1. Mount the faulty device to your computer, Click Start (Windows key on keyboard), type cmd and open it.

Step 2. Enter the command line:  Chkdsk H: /F

Where H is the drive letter of the external device that encountered the error, make the appropriate change to your computer.

Method 2: Use Flash Repair software to fix corrupt or unreadable files

Flash Repair is a free utility that will help you fix this problem completely on short devices.

Step 2:  Enter the name of the external device and then enter the program to execute

The time comes to an end.

So, with 2 ways to guide you how to fix the file or directory is corrupted and unreadable on USB or other devices. Good luck!

How to fix IDT High Definition Audio CODEC Driver Problem

It’s not always easy to update Windows 10, and sometimes upgrading your Windows 10 Creators Update with IDT High Definition Audio on Windows 10 is not uncommon. The following guide will help you fix IDT High Definition Audio on Windows 10.

IDT High Definition Audio is difficult to identify because of the many causes of IDT High Definition Audio that prevent you from updating Windows 10 Creators Update. However, we can understand the cause of this mainly due to the conflict of the sound card, namely the software supports it IDT High Definition Audio with the system update Windows 10. To be able to fix the IDT High Definition Audio on Windows 10, help you not lose the sound as well as not update failed.

Typically, Windows automatically updates every time a new version is released from the publisher, and if you do not notice it, the update process will take a certain amount of time, causing you to wait for it, and possibly After updating, there are many other errors, so right now you can proceed to shut down Windows 10 update to not have to worry about that.

Before going into the IDT High Definition Audio troubleshooting guide on Windows 10 you should note that not all devices use IDT High Definition Audio, maybe on some computers, laptops are Realtek High Definition Audio rather than IDT High Definition Audio and will encounter errors such as IDT High Definition Audio.


Step 1: To fix IDT High Definition Audio on Windows 10, you need to go to Device Manager, install devices, drivers on your computer by pressing the Windows + X key combination and select Device Manager.

Step 2: In Device Manager, you will find the Sound, video and game Colltrollers option and remove this driver with Uninstall device.

Step 3: Then you click again on the Action menu and select Scan for hardware changes to search and reinstall drivers have just deleted.

Step 4: Next, press the Windows key + then type “Services.msc” then hit enter to access the management of services on the computer.

Step 5: In the Services you find Windows Audio and access the Properties of the Windows Audio.

Step 6: Then switch to Services for Startup type Automatic (delayed Start) and then Apply.

Step 7: Next you do the same with Windows Audio Endpoint Builder to fix IDT High Definition Audio on Windows 10.

Step 8: Continue to select Startup type to Automatic (delayed start) and then Apply.

After you perform the above procedure, restart the computer to see if the IDT High Definition Audio fault condition in Windows 10 has been corrected and the computer can update the operation again.


Fix the problem of Photos app not working on Windows 10

The new Windows Photos app (actually from Windows 8, but still the latest integrated image viewer) has a nice interface and rich image filtering options. However sometimes it happens that the error is not working and this is how to fix it.

Note: Before following these troubleshooting steps, you need to run run-time to check for corrupt system files on Windows 10. To perform a check, open Command Prompt, type sfc /scannow and start the command . back to windows.

1. Reset the Photos app

Resetting the Photos app will clear the application cache and reset all data to the default settings.

To reset, right-click the Start menu and go to ” Apps and Features “. Next, scroll down to click on ” Photos ” in the list, then click on ” Advanced options “, and in the next window, click on ” Reset “. This will delete all data from the Photos app, including any presets or saved images, to their original state.

2. Delete and reinstall the Photos app

If that does not fix the problem, you should try removing the Photos app manually and then reinstalling it. However, you can not do this through the ” Apps and Feature ” list as with other common applications. Instead, you need to use an advanced PowerShell command.

Click the Start menu, type powershell, then right-click PowerShell and select ” Run as administrator.” In the Powershell window type the following:

get-appxpackage *Microsoft.Windows.Photos* | remove-appxpackage

After pressing Enter, the Photos app will be deleted. To reinstall it, go to the Microsoft Store app, search for “Photos“, then select and install the Photos app (note, the developer of Photos application is “Microsoft Corporation”).

3. Perform system restore

If you know of a problem with the Photos app, you can do a restore before the problem occurred.

Go to the Start menu , type restore and then click on “Create a restore point “. In the new window click on ” System Restore ” and then follow the prompts until you select a restore point. Select the time before the crash and continue the process.

4. Use Windows Photo Viewer

or a lot of people, the old Windows Photo Viewer works very well. Although it is not as flashy as “Photos”, it works well and provides easy access to photos in folders.

Microsoft has gradually removed Photo Viewer, however, if there is a computer with pre-installed Windows 10, you can set Photo Viewer as the default application. View Windows Photo Retrieval Windows 10 Viewer for faster, slower photos!  To know how to use it on Windows 10. 


If you are running a Windows machine with different processors paired up. Then during software installation or Windows update, it is possible that you may receive the MULTIPROCESSOR CONFIGURATION NOT SUPPORTED error. This error check has a value of 0x0000003E. This also indicates that the processors are asymmetric in relation to each other. If you want to upgrade, you need to have all the same type and level of processor. In this tutorial, we will help you solve this blue screen problem on Windows 10.


This blue screen error can happen in different situations. It may appear during the installation of Windows 10, when the driver updates or when shutdown, the chance of getting a blue screen is very high. If you see this error, here are a few things you can try to fix.

Disable Hyper-Threading trong BIOS

Hyper-threading allows a processor (multi-threading) to run multiple tasks simultaneously. To turn off this feature, restart the PC and boot into the BIOS. To know how to enter the BIOS for the machine, you can visit here . After entering the BIOS, look for the Hyper-Threading option and turn it off. Then save and exit.

Although Hyper-Threading is only used when needed, some OEMs do not offer the option to disable this feature. If so, you can not do much.

Disable Virtualization trong BIOS

Virtualization allows users to run a single physical resource such as a server. In the previous article I have been instructed how to enable this feature to fix VMware errors, AMD-V, VT-x is disabled when running the virtual machine. Now we’re going to turn it off. To do this you need to boot into the BIOS and look for the Security option. You should be able to find Virtualization Technology or VTX in the options. Turn off and restart your PC.

While Windows 10 also offers features like Device Security for Core Isolation and Memory Integrity, shutting them off at software level will not help. When you can resolve this error, you can further research and see which software or hardware fixes can help you further.

Check for BIOS update

Updating the BIOS is a good idea to fix the blue screen error on Win 10. You can search and download the BIOS updates on the OEM home pages for installation. Updates often provide improvements and bug fixes that will eventually help software maintain compatibility between hardware and software.

Windows Detected A Hard Disk Problem – Fix It Now!

Maybe the hard drive is not the most important part of getting your personal computer up and running. But when the message ” Windows detected a hard disk problem ” appears on the PC screen, then quickly “cure” the hardware date immediately by the ability to very high data, the information you have thickly created. erection and arrangement risked disappearing. 

Possible causes are errors

There are many causes for the error message ” Windows detected a hard disk problem “.

Do not disregard the message "Windows detected a hard disk problem"!
Do not disregard the message “Windows detected a hard disk problem”!

Common system errors can also warn you about hard drive failure. Potential system errors such as registry errors, RAM corruption, file fragmentation, excessive downloads, viruses, malware, etc. For these systems, we can try to recover by cleaning up the junk files. , update.

Physical or logical damage on the hard drive is a sure sign of danger. Windows has detected a hard disk problem to inform you about data loss prevention. Bad sectors, metamorphism systems, physical collisions are the reasons to be considered.

Viruses can also be suspicious. In theory, your PC will not be infected as long as the protection is strong enough. However, this does not mean that these programs can recover system damage after eliminating malicious code lines.

Uninstalling an unfinished program, improper shutdowns, accidental deletion of important files also causes system corruption, missing important connection data to keep the computer operating normally.

How to fix “Windows detected a hard drive problem”

Use System File Checker

Windows provides the basic tools to correct errors that many common users may not know.

Use the Windows + Q key combination and search for Command Prompt . Right-click the program and select Run as administrator.

In the window that pops up, type in the sfc /scannow line and confirm by pressing Enter .

Fast and efficient wall-mounting immediately if any file system is degraded. This command will scan all system files and replace the problematic file with a backup copy. So do not turn off the program until the process is 100% complete.

Execute ChkDsk

If the first way is not working, maybe the second way is to report “Windows detected a hard disk problem“.

Do the same thing with the Command Prompt. Once the program window has appeared, type in the chkdsk command line and confirm.

The main function of the chkdsk command is to find and fix errors for the NTFS or FAT file system . Therefore, if “Windows detected a hard disk problem” is actually caused by system files, chkdsk will be able to fix the problem.

Check Bad Sector

There are many ways to test the Bad Sector and usually with the help of third party software such as EasyUS or Partition Guru.

How to fix "Windows detected a hard disk problem" with PartitionGuru.
How to fix “Windows detected a hard disk problem” with PartitionGuru.

Download the application, select Disk> Verify or Repair Bad Sector. A report of the status of the hard drive will be made when the process is complete.

The weakness of this program is that physical defects can not be reversed.

Contact Warranty

With a physical error that can not be repaired on its own, the last solution is to contact the support team of the dealer where you bought your hard drive or any reputable repair center. other. It may cost you money, but it’s more secure with expert help.

Windows Update Error Code 0x8007025D-0x2000C – How to fix

Many users have received the error code 0x8007025D-0x2000Cwhile updating Win 10 with tools create ISO or Media Creation tool. Along with this error code, there is a detailed error message as follows: The installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation.

 This error primarily occurs when the Windows 10 installation files have problems, and Windows Update fails to update using the ISO or Media Creation tool. In this article, we will suggest some solutions that can help you solve the problem when updating Windows 10.

How to fix Update Win 10 Error Code 0x8007025D-0x2000C

1. Refresh USB install Win 10

Please try reinstalling the USB to install Windows 10 again to see if that fixes the problem. We should choose the USB read and write speed stability and error free to avoid the USB error can occur.

2. Reload ISO ISO file

It is possible that the ISO file that you downloaded is corrupt causing error 0x8007025D-0x2000C. Then follow the steps to proceed to update Win 10.

3. Update BIOS/UEFI 

Some users fix the 0x8007025D-0x2000C error by updating the BIOS to the latest version. Be sure to check with your OEM to download the latest drivers.

4. Restart BITS Service

BITS or Background Intelligent Transfer Service is part of the Windows Update service, manages the download of the Windows Update background, scans for new updates, and more. If your Windows Update fails multiple times, you may want to restart the BITS service. You will need to use Admin privileges to perform this task.

  • Open  Services Manager by typing  services.msc into the Run dialog box (Windows + R) and pressing Enter.
  • Find the  Background Intelligent Transfer Service  and double-click it to open Properties.
  • In the Properties window, in the section ‘Startup type’ you to the Manual , then click on the Start button. If that does not work, set it to Automatic (Delayed) and restart your computer.

Hope these tips can help you fix Windows update error 0x8007025D-0x2000C.

Error x80070002 on Windows 10, 8.1, 7 – How to fix

When you are happy about upgrading your version of Windows to have a whole new operating system experience and promising features provided by the latest versions, you may encounter some bugs and crashes. It will cause you to stop working. However, in this post, we will talk specifically about the error code  80070002 which sometimes keeps people moving forward with their updates on Windows.

Let’s talk about this error code first and see why it happens. Cause of error – Error x80070002 or x  80070003 occurs because of a corrupt or missing file in Windows after the update.

Error x80070002, how to fix bugs on Windows 10?

Error x80070002 may have problems and prevent you from installing the latest updates. Speaking of this error, here are some similar issues reported by users:

  • Error 0x80070002 Windows 10, Windows 7 – This error can appear on almost any version of Windows, and if you encounter it, you should be able to fix the problem using one of our solutions.
  • Windows Update service not running – This message is frequently related to this error, but you can fix this problem simply by enabling the Windows Update service on your own.
  • Installation failed with error 0x80070002 – Sometimes you might get this error message on your screen. If that happens, reset Windows Update components and check if that helps.

Solution 1 – Reset the Windows Update components

According to the user, the x80070002 error may appear while trying to install the update. This issue may occur because of a problem with Windows Update and to fix the problem, you should reset the Windows Update components.

You can do this manually, but this can be a tedious task, so it’s better to use the command line for such a task. To do that, follow these steps:

  1. Press  Windows Key + X to open Win + X Menu. Select Command Prompt (Admin) or Powershell (Admin) from the list.
  2. When the Command Prompt starts, run the following commands:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
Ren C:\Windows\System32\catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

After running these commands, check to see if the problem is resolved.

Resolution 2 – Rename the CBS.Log file

Occasionally, the x80070002 error may appear due to a CBS.Log file on your PC. The file may be corrupted, and the best way to deal with it is to rename it. This is quite simple to implement and you can accomplish this by following these steps:

  1. Hit the Windows + R  and enter %systemroot%\Logs\CBS. Now press Enter or press OK.
  2. Locate the CBS.Log file and rename it to anything else.

After renaming the file, check that the issue has been resolved.

Some users have reported that they can not rename this file. If this is the case, you must first stop some services manually. To do that, just follow these steps:

  1. Hit  Windows Key + R and enter services.msc. Press Enter or click OK.
  2. When the Services window opens, locate the Windows Modules Installer service and double-click it.
  3. Set the Startup type to Manual and click Apply and OK to save the changes.
  4. After the PC reboots, you can rename the CBS.Log file.
  5. Back window Services and set the Startup Type of Windows Modules Installer to Automatic  and reboot your PC.

Solution 3 – Download the update manually

Error x80070002 commonly occurs when trying to download a Windows 10 update. This can happen due to different issues, and if you can not fix the problem, you can always download the update manually.

Before you do that, you need to find the number of your updates. You can do that from the Windows Update section. The update code has KBs from the beginning, followed by a series of numbers.

Once you find the update number, you need to do the following:

  1. Go to the Microsoft Update Catalog website.
  2. In the search box, enter the code of your update.
  3. A list of matching updates will appear. Select the appropriate update for your architecture and click the Download button next to it.
  4. After you download the update, run the setup file to install it on your PC.

Keep in mind that this solution will install missing updates, but it may not fix the core issue, so you’ll have to do it manually.

Solution 4 – Check your anti-virus software

Another common cause for x80070002 error might be your antivirus software. Sometimes, anti-virus software can affect your system and this can cause this error and other errors to appear.

To fix the problem, you should turn off certain anti-virus features and check to see if that helps. If that does not work, you may have to turn off your antivirus completely.

In case of inactivity, your next step is to remove your anti-virus software. If you remove antivirus software, you should consider switching to another antivirus solution. There are many great antivirus applications on the market, and if you want an anti-virus software that does not interfere with your system while providing maximum protection, you should consider Bitdefender.

“Some settings are hidden or managed by your organization” in Windows 10

You recently upgraded your computer from Windows 7 to Windows 10 and had a problem that I could not find.

When trying to change some system settings, the setting options are disabled and the screen displays this message:

“Some settings are hidden or managed by your organization.”

How can this be fixed so that you can change the system settings on your PC?

Your PC may have a “Diagnostics and usage data” security setting set to “Basic.” I have set my Basic as well because that limits the amount of data that the PC sends back to Microsoft related to your usage habits.

The problem with the “Basic” setting is that it blocks some system settings and displays the message you quoted above. In short, it prevents you from changing some of the settings in Windows, as you have discovered.

This is a common problem with Windows 10, but luckily there is an easy fix that works maybe 95% of the time. Just follow the steps listed below:

1 – Click the Settings icon   (it looks like a “gear” or “aliasing”).

2 – Click on Privacy  .

3 – Click the Diagnostics & feedback link  in the left column.

4 – In the field labeled “Diagnostic data”, select the radio button next to Full  .


You will no longer see the message “Some settings are managed by your organization” and you can now change your system settings to your heart’s content.

And now, a few things for you to consider …

  • To protect your privacy as much as possible, I recommend that you change the “Diagnostics and usage data” setting back to Basic  after you have finished changing the desired settings.
  • As I mentioned above, this repair operation is probably 95% of the time. If it does not work in your case, let me know and I’ll let you know what to try next.


This Device Can Perform Faster – How to fix

Have you ever received a “This device can perform faster” error message on the screen when connecting a USB device to a computer?

This error informs you that you can speed up the USB connection by using another physical connection port (USB 2.0 port) or other hardware. However, if you have connected via USB 2.0, the above message still appears, here is a bug that you need to learn and take some steps to solve the problem.

1. Equipment and port are not compatible

First, make sure your device is compatible with the port. For example, if you use an older USB 1.1 drive plugged into a USB 2.0 port, Windows will display a “this device can perform faster” error message.

In this case, your device may not work faster but your USB port is working at a lower capacity than the speed that it actually supports. In addition, you should also check the version of the cable that you have used.

Same if you plug USB 2.0 into USB 3.0 port. USB is backward compatible, so reading speed is not what you want.

2. Drivers

USB driver error can also cause “This device can perform faster” error.

To fix this, you can download and install the latest USB driver or motherboard driver from the manufacturer’s website. You can also access the Device Manager Device Manager on your computer.

On the Search Start menu, enter the Device Manager keyword and press Enter. Here, you look at the USB ports and see if any of the ports are faulty (with the yellow exclamation mark). If so, right-click on the device and select Update Driver Software to update the device drivers.

3. Cables

Another possible cause of the error is the USB cable. If the cable is designed for USB 1.1 standard devices, it will not work at the speed of USB 2.0.

In some cases, the USB cable may be faulty. Then you just change the cable is finished.

4. Hardware error

Try plugging a USB cable or cable into another USB port on your computer. In some cases the cause of the error may be due to a faulty USB port and not working properly.

The cause may also be due to the device itself connected to the computer. In this case you can test the USB by plugging into another computer without this error. If the same error still occurs, the cause is USB, not the computer.

5. Source

Some devices may need more power than the amount of power it receives from a USB connection, for example external hard drives need more power than USB keyboards. If you are using a USB hub and receive the error message, it is likely that you did not provide enough power for the hub.

There are actually two types of USB hubs: one that uses only power from a computer and one that can use power from an external source. Typically, only a USB hub that uses power from an external source can provide enough power for connecting your devices.

Also this error can occur because the cause of the USB port on your computer is not well-designed power delivery. This case involves computer hardware. You can try plugging the device into another USB port.


Many computers with BIOSes can set the transition between different modes for USB-compatible purposes.

In general, the BIOS settings are always optimal, but sometimes these settings have been changed. To access the BIOS of your computer, when you restart your computer, you press the key that appears on the screen – usually the F2 key or the  Delete key . When accessing the BIOS screen, look for the item called USB Mode (or similar) and make sure that the device is set up as fast as possible.

For example, if your computer supports USB 2.0, set USB Mode in the BIOS should set to 2.0 mode, not 1.1 mode. This setting can also be named as “high speed” USB, depending on the type of BIOS.

7. Disable warnings

If you have tried everything, you still can not fix the problem, or if the cause of the problem is located on the device or is located on the computer and you are forced to live with it. You can then disable the warning that appears on the screen every time you connect the USB to the computer. The device will still run at the lower speeds theoretically, but at least Windows will not bother you any time displaying the message on the screen.

To disable the warning appear on the screen, open Device Manager (type Device Manager on the Start menu and press Enter), then right click on the USB host controllerunder Universal Serial Bus controllers and select Properties .

Here you go to Advanced tab and uncheck Tell me if my device can perform faster then click OK is finished.

All files converted to .lnk files – How to fix

Lots of users have recently come to the conclusion that they frequently face the “All files converted to .lnk files” error when opening a program from a shortcut icon on a desktop. On Windows, the file .lnk is used to refer to the shortcut created by the .exe file. This file is used to open programs and is called shortcut file.

In the article below, BlogTip will guide you four ways to fix this error on the Windows operating system.

1. What is a .lnk file?

On the Windows operating system, the .lnk file is used to refer to the shortcut created by the .exe file. This file is used to open programs and is called shortcut file. When you click on an .exe file, the .lnk file will properly map the program and open it.

2. Cause file error .lnk

The cause of the .lnk file error on your Windows computer might be:

 Usually caused by viruses.

 Also, the cause may be due to corrupt or missing registry.

3. Solution to fix all files converted to .lnk file

3.1. Restore the .lnk file behavior

The first solution you can apply is to restore the default behavior of the .lnk file. To do this, download the Registry file below to your computer and install, depending on which version of Windows you are using.

Once finished downloading the registry fix, run the registry fix and let the program run when prompted.

Finally reboot your system and check whether the error is still there or not, if the error persists you proceed to the solution below.

3.2. Manually edit the Registry

To manually edit the Registry, follow these steps:

First press the Windows + R key combination to open the Run command window. Then enter regedit in the Run command window and press Enter to open the Registry Editor window.

On the Registry Editor window, navigate to the following key:


Click on the arrow icon to expand and delete the subkey named UserChoice.

Close the Registry Editor window and reboot your system again, check for errors or not.

3.3. Use the 3rd tool

In addition to the above solutions you can use 3rd party tools to fix errors related to .lnk files. Download the 3rd party tool, install and use it to fix the problem below.

3.4. Scan your system with anti-virus software

As mentioned above, the cause of .lnk file errors can be a virus attack on your system. So to fix the problem you can apply the solution is to use anti-virus software to scan the system and check whether the error or not.

“NTLDR is Missing” in Windows XP – How to fix

There are various “NTLDR is Missing” error messages, below are some of the most common error messages.

  • “NTLDR is missing Press any key to restart”.
  • “NTLDR is missing Press Ctrl Alt Del to restart”.
  • “Boot: Could not find NTLDR Please insert another disk”.

The “NTLDR missing” error appears very shortly after the computer is started and immediately after the Power On Self Test (POST) completes. Windows XP starts only when the NTLDR error message appears.

The “NTLDR missing” error appears very shortly after the computer is started and immediately after the Power On Self Test (POST) completes. Windows XP starts only when the NTLDR error message appears.

Causes NTLDR error

There are a number of possible causes for NTLDR errors, including the most common “NTLDR is missing” problem.

The main reason for this error is when the computer tries to boot from the hard drive or the flash drive is not properly configured. In other words, it is trying to boot from an unbootable source. In addition, booting from media on optical drives or floppy disks also causes this error.

Other causes are NTLDR errors such as corrupted files, misconfiguration, problems with operating system and hard drive upgrades, corrupted hard drive sectors, unused BIOS updates, and IDE cables. loose or damaged.

How to fix “NTLDR is Missing”

1. Restarting the computer, restarting the computer can fix many problems and there are NTLDR errors.

2. Check the media on the floppy disk drive, optical drive (CD / DVD / BD) and disconnect all external drives. As mentioned above, the “NTLDR is Missing” error occurs when the computer tries to boot from the floppy disk, CD / DVD.BD, external hard drive or flash drive can not boot.

Note: If it detects that this is the cause of the NTLDR error and the frequency occurs frequently, you should consider changing the boot order in the BIOS so that the hard drive installed with Windows is the first in the list.

3. Configure correctly. BIOS configures the way the hard drive works on the computer so misconfiguration can lead to many problems including NTLDR errors.

Note: If you are not sure about the settings in the BIOS, you should configure the optical drive and the hard drive in Auto mode.

4. Restore the NTLDR and files from the Windows XP CD. Restoring these two important system files from the original Windows XP CD can fix the NTLDR is missing problem.

5. Modify or replace the boot.ini file. The boot.ini file that is not properly configured when installing Windows XP may cause NTLDR errors. Therefore, fixing or replacing this file may fix the problem.

6. Write a new boot sector for the Windows XP system partition. If this boot sector is corrupted or not properly configured, it can cause the “NTLDR is Missing” error, so you should consider writing a new boot sector.

7. Repair the Master Boot Record in Windows XP. The NTLDR error message may also appear if this boot record is corrupted.

8. The NTLDR error message may be caused by a broken or loose IDE cable, so you should check the IDE cable connection to see if this is the cause of the NTLDR error. If so, replace another IDE cable.

9. Update your motherboard BIOS. Sometimes, the BIOS is not updated, which also causes the “NTLDR is Missing” error.

10. Install Windows XP in Repair mode. When installed in this mode can replace the damaged or lost files.

11. If the above does not fix the problem “NTLDR is Missing”, you should perform a clean install of Windows XP. When installed new, Windows Xp will be completely removed from the computer and reinstalled from the beginning.

Note: Although this method can fix almost all NTLD errors, this is a time-consuming process because you will have to back up and restore the data. In case you can not access the files for backup, that means you will lose all your data if you continue to install new Windows XP.

12. Replace the hard drive and then perform a clean installation of Windows XP. If after installing a new Windows XP that still can not fix the problem, then probably due to hardware. Please replace a new hard drive and perform a fresh installation of Windows XP.

NTLDR errors only occur on Windows XP operating systems, including Windows XP Professional and Home Edition. Windows 10, Windows 8, Windows 7, and Windows Vista use BOOTMGR, not NTLDR. If you get the “NTLDR Missing” error in one of these operating systems, especially during the installation process, try starting with the new installation process from scratch.

Taskbar Missing Icons in Windows 10 – How to fix

Tiles are what appears on the Start menu. If you have applications, Start Menu basically will just be a list of these applications and take up space on the computer only. However, for some users, tile icons on the Start menu seem to have disappeared. Application tiles are kept in their original position, and if you hover your cursor over these positions, you will be able to read the name of the corresponding application. However, the icons do not appear. Here are some ways to fix missing tile icons on the Start menu in Windows 10.

Resize the tile

Right click on the tile with the missing icon and from the context menu, go to resize . Resize the icon to anything. This makes the tile appear again. Restart your system to see if the fixes work after a reboot.

Create an application shortcut in the Start Menu folder

For applications that are missing the tile icon, locate their EXE file and create shortcuts for them on the screen. Next, go to the following location:

C:\Users[UserName]\AppData\Roaming\Microsoft\Windows\Start Menu\Programs

Copy and paste the shortcut to the location above. Do this for all applications without the tile icon. If a shortcut has appeared in the Start Menu folder, you should replace it with a new one. If you do not have a shortcut, go ahead and paste it here.

Use the Startup Repair Tool

Download the Microsoft Startup Repair Tool and run it to see if it can fix the problem. It can tell you that your database is broken and unfortunately there is no easy way to rebuild this database at all. Even Microsoft recommends that you create a new user to fix the problem. But before doing this, try the other fixes below.

Use the PowerShell script

Open Notepad and paste the following into Notepad . Save it with BAT extension , and then run the file with administrator privileges. Your taskbar will be gone for a while, but do not worry, it’s just restarting Explorer.exe . When the taskbar returns, reboot the system and check if the tile icons are back.

@echo offtaskkill /f /im explorer.exe
taskkill /f /im shellexperiencehost.exe
timeout /t 3 /NOBREAK > nul
del %localappdata%\Packages\Microsoft.Windows.ShellExperienceHost_cw5n1h2txyewy\TempState\* /q
timeout /t 2 /NOBREAK > nul
start explorer
@echo on

Use Command Prompt

Open Command Prompt with administrator. You should close everything else at this point. The commands you are about to execute will take some time and the Explorer.exe process will be terminated, making switching between applications difficult.

Run the following commands, one by one.

DISM.exe /Online /Cleanup-image /Scanhealth

Next is:

DISM.exe /online /cleanup-image /restorehealth

And then:

sfc /scannow

This can fix corrupted system files. It will take some time to complete. When finished, reboot your system. If the sfc /scannow tool tells you it can not fix corrupted files, you may have encountered a more serious problem. The only way is to reset your PC or create a new user and move your files to it.

Display Driver Stopped Responding and Has Recovered – How to fix

Error “Display Driver Stopped Responding and Has Recovered” very often happens when gaming on your PC or Laptop whether to configure reliable matter where expenditure. Often, this problem only occurs in games that need to be connected to the Internet when playing on Windows 10, Windows 8 and 8.1, Windows 7, or Windows XP.

This error occurs when the feature Timeout Detection and Recovery (TDR) receiving ventricular graphics card (GPU)  does not respond within a certain time period, or does not receive a response from the Windows Display Driver Model (WDDM). Other errors similar to Display Driver Stopped Responding and Has Recovered may be displayed with different alerts, including:

“Display driver stopped and recovered successfully problem in Windows 8.1”
“How to solve nvidia error display driver stopped working and recovered”
“Display driver stopped responding timed out”
“Display driver has stopped working and has recovered Windows 8.1, Window 7 32-bit hoặc 64bit”
“Display driver stopped responding and has recovered Windows 10 hoặc 8.1″
“Why does my graphics card say corrupted or broken”
“Display driver stopped responding windows 10 hoặc 8.1 nvidia” …

Reason “Display Driver Stopped Responding and Has Recovered”

Every time you start your computer, open any application or play a game, watch a movie, Windows system, or program that may be in a “Not in (not working)” state or sometimes displaying a blue screen of death (BSOD) or black screen completely. And immediately, you will see the error message “Display Driver Stopped Responding and Has Recovered”. There are several main reasons for this:

  • Drivers are outdated, corrupted or damaged by computer viruses .
  • The graphics card is outdated, but you have not installed or updated the latest driver to match the current game.
  • Many programs work together to cause conflicts and errors.

How to fix “Display Driver Stopped Responding and Has Recovered”

When your PC or laptop is running Windows with this error, take a few simple steps below to fix it.

1. Increase GPU processing time by adjusting the value in the Registry

Note: This method will tell you how to modify the Registry, although you can interfere with the Registry to fix the problem. However, consider following the instructions in order to avoid other possible problems.

Step 1: Press the Windows + R key combination to open the Run dialog box. Then enter the following command and press Enter to open the Registry dialog box.


Step 2: Find the path below.

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ GraphicsDrivers

Step 3: At the right of the GraphicsDrivers interface, right-click on the anti-virus icon and select New >> choose DWORD (32 bit) or (64 bit) depending on which Windows operating system you are using.

Step 4: Name this value TdrDelay and press Enter.

Then, double-click TdrDelay and enter a value of 8 in the Value data box. Finally, click OK to save.

Now, you can restart the computer and experience the results.

After modifying the Registry here, if something goes wrong or does not fix the problem , you can remove the TdrDelay added and then restart your PC.

2. Update the latest drivers for your computer

The preferred driver is the graphics card driver, in the previous article I talked about ways that can help you update the latest and most effective driver for both PC and Laptop, if you do not know how to do.

Turn off running or running applications

If you open too many apps, browsing the web or playing multiple games simultaneously can cause the above errors. Therefore, if your computer has a weak configuration, especially with onboard graphics, but the RAM is pretty low <2GB, then you should limit running multiple applications simultaneously.

4. Should buy more or change the new curtain card

If you have tried two ways on the error still Display Driver Stopped Responding and Has Recovered “, then bring your PC or Laptop to the store for the technician to help you with the possibility of Onboard Card or discrete card. In this case, you can only replace the video card only.


These are simple tips that you can refer to whenever your PC or laptop appears to have problems. However, often when applying method 1 will solve the problem only. However, there are cases where you have to buy a new video card if you want to use your computer normally or to play games that you love.