How to fix Has Stopped Working on your computer

Has Stopped Working is simply a software status, which stops when you start or you are using it. There are many causes for Has Stopped Working errors on the computer and they will be handled in our article below.

Sometimes when you use the computer you encounter a message board display Has Stopped Working, that is when your application, software or game problems. For example, if you are playing a counterfeit game, unfortunately, the Has Stopped Working has been reported. This is also a time when you automatically get thrown out of the game, this is not a random error that it happens quite often. Some games today, not just Trace. There are many causes for the above error and if we do not fix it thoroughly, not only Has Stopped Working Has Been Punished but many software, game Has Has Stopped Working error on the computer.

In this article we will guide you the causes as well as how to fix Has Stopped Working errors on the computer, readers can rely on that to conduct checks as well as fix Has Hasped Working error on the computer.

HOW TO FIX “HAS STOPPED WORKING ERROR” ON COMPUTER

1. System Error

The Has Stopped Working error on your computer is probably because your computer is infected with a virus, these viruses take up some of the computer’s rights and modify them, and some of them break your operating system, causing parts software, application or game Has Stopped Working error. To fix the Has Stopped Working error on the computer we first need to check the entire computer with the tools available on the computer.

Step 1: First press the Windows + X key to open Power Menu then select Command Prompt Administrator.

Step 2: In the Command Prompt interface you type sfc /scannow system test command to the system to test offline.

This will take about 10 to 15 minutes to test, if any errors will be displayed on the Command Prompt screen for you.

2. Computer hard drive is broken

Hard drive failure also affects read and write data and possibly Has Stopped Working errors on your computer due to hard drive, so you need to check your hard drive for accuracy. Is the main cause or not through the tool called Scan disk.

Step 1: Right click on the C drive select Properties.

Step 2: In the Properties of the C drive to Tools and click on the check in the Error checking offline, this operation will help the hard drive is completely rechecked.

Step 3: The Error checking window appears, click Scan Drive to scan all the corrupted files if found.

In the case of the message No errors were found, the status of Has Stopped Working on the computer is not due to the hard drive, and if any error message is prepared to replace your hard drive.

3. Conflicts of Running Programs

Having multiple processes running in the background is one of the causes of Has Stopped Working errors on your computer, as you know Windows is an open operating system, so software and applications are installed without much pressure. standard in it. Because of this, they can overlap with Has Stopped Working. To get rid of this situation, we have to temporarily shut down the applications running in the background to see whether the computer has this status.

Step 1: Press Windows + R then type “msconfig” and click ok to access.

Step 2: In System Configuration, switch to the Services tab and click Hide all Microsoft services.

Then select Disable All to turn off all services that are not running on the system and then restart the computer for Has Stopped Working errors on the computer.

4. Due to Failure or RAM Error

The software, the application borrowed RAM to handle but not returned and so hung there that is also the cause of Has Stopped Working error on the computer so we need to check what the cause is error. Your RAM or RAM is already corrupted.

Step 1: First open the Start Menu and type “memory” to access the Windows Memory Diagnostics.

Step 2: Immediately a Windows Memory Diagnostics panel pops up asking you to reboot. Choose the first option to restart the machine immediately or the second option is the option to restart the machine after you.

Step 3: Now your computer will automatically restart and enter the Windows Memory Diagnostic mode, you can press F1 to select 3 different modes.

Step 4: There are 3 modes: Basic, Standard and Extended with deep scan. If you have time, choose Extended for the best test.

Then go back to Windows to see what kind of RAM is occurring when performing a RAM check, so you will know whether the cause is due to RAM caused Has Stopped Working error on the computer or not to carry out repairs. , replace RAM.

Here are the causes and how to fix the Has Stopped Working error on the computer, one of the nasty bugs when you open a software or running any software. Hope the article above will help you a lot in using Windows as well as repairing Windows 10 as well as know how to prevent this error Windows 10 from your computer.

Fix Windows 10 Errors 0xc004e016 and 0xc004c003

Actually there are a lot of errors that may occur when you want to activate Windows 10 or change product key. And here is one of the common mistakes that we’ve encountered and summed up for reference users with error codes 0xc004e016 and 0xc004c003 that occur when you activate a copy of Windows 10.

First, you must make sure that you are using the unused product key on another computer. Because, if you ‘re using the product key it will work. And if you’re using an authenticated product key but still get 0xc004e016 or 0xc004c003 errors, you can try some of these solutions:

Solution 1 – Run a few Command Prompt commands

The first solution may be useful, if you can not activate your Windows 10, or change the product key is trying to fix everything with the Command Prompt. This is exactly what you need to do:

  • Right-click on the Start Menu button and open Command Prompt (Admin)
  • Enter the following commands and press Enter after entering each command:
    • slmgr /upk
    • slmgr.vbs /cpky
    • slmgr /ckms
    • slmgr.vbs /ckms
    • slmgr /skms localhost
  • Close the Command Prompt and try to activate your Windows 10, or change the product key again.

Solution 2 – Change the product key using the slui.exe command

Slui.exe is a pre-installed Windows command that allows users to change the product key. So, if you have problems with normal activation, you can try this method. Here’s what you need to do to activate Windows 10 or change the product key using the slui.exe command:

  • Go to Find, type slui.exe 3 and open it.
  • Enter your product key and check whether you can activate Windows now.

If that does not work, you can try another slui.exe command:

  • Go to Find, type slui.exe 4 and open it.
  • Enter your product key and check whether you can activate Windows now.

Solution 3 – Try to upgrade to Windows 10 again

When you upgrade to Windows 10 is a genuine Microsoft Software License with hardware bound and sometimes there may be some activation and hardware related errors, so before you start, Remove all Windows 10 lists from Devices on your Microsoft account.

Perform a reinstall of Windows 8.1 and log on to it with your Microsoft account; make sure your Windows 8.1 is activated by running Command Prompt and typing slmgr.vbs /ato on it.

When Windows 8.1 is enabled, you can upgrade to Windows 10 through Windows Update. Remember to log on to Windows 10 with your Microsoft account. Alternatively, you can run Command Prompt and type slmgr.vbs / ato to see if your Windows 10 has been activated. You can also check if your computer is listed under the Devices section of your Microsoft account.

There are all methods to fix Windows 10 errors 0xc004e016 and 0xc004c003 that we synthesize through experience, hope it will be useful for you to read. If you are still not successful, you can contact the technical system, or contact the Vdotrading system will be free consultation. Address:

Fixed ISDone.dll error on Windows 10

ISDone.dll error usually occurs during game installation on Windows 10 and earlier versions of Windows. The main cause of the error is due to insufficient memory to handle missing or corrupt DLLs or applications. Large games are frequent victims because of the lack of available RAM.

To fix the ISDone.dll error on Windows 10, you need to focus on two main factors: 1 is memory and the other is DLL. As for RAM, there are two possible scenarios, or the amount of RAM on Windows 10 is not enough to handle applications, games or hardware failures.

Refer to the ISDone.dll fix on Windows 10 in the next section.

Fix ISDONE.DLL ON WINDOWS 10

Go to Safe Mode and install Game

Large games contain a lot of files, and these files can cause conflicts with drivers installed in your system or third-party software. The solution is to boot into Safe Mode and install the game.

Once access to Safe Mode, all these applications will not load, giving up empty space so that you can install the game and no longer crash ISDone.dll.

Step 1: Press and hold Shift and restart your computer by clicking the Start button on the taskbar, then selecting the Power icon and choosing Restart.

Step 2: After your computer boots into Safe Mode, proceed to install the game that displays the ISDone.dll error.

Step 3: Use the Windows + R key combination to open the Run window, then type msconfig into it and hit Enter or click OK.

Step 4: On the System Configuration window, navigate to the Boot tab. Here you uncheck the box next to the Safe boot option located in the Boot options and then click Apply => OK.

After the computer boots up, you can freely install and play the game without the ISDone.dll error anymore.

If the ISDone.dll error on Windows 10 is related to RAM, you can refer to the corrective steps below.

Solution Fix ISDone.Dll Error On Windows 10 Regarding RAM

If the ISDone.dll error on Windows 10 is related to RAM or memory, here’s how to fix it.

Increase Paging File Size

Big games take up a few tens of gigabytes of space, so your computer’s RAM does not have enough space for storage. Windows uses a file called a paging file to do virtual memory, storing data that can not be contained if the memory is full.

The solution is to increase the size of the paging file to store the game.

Step 1: Press Windows + R to open the Run command, then enter sysdm.cpl into it and press Enter or click OK.

Step 2: On the System properties window, click the Advanced tab. Here you choose Settings under Performance.

Step 3: On the screen will display the Performance Options window, where you click the Advanced tab, then select the Change button in Virtual memory.

Step 4: On the Virtual Memory window, uncheck the option to Automatically manage the paging file size for all drives, then select the Custom size option.

In the Initial size (MB) box, enter 100 and the Maximum size (MB) is 300 (note that you can increase this size if your game is large), then click OK.

The popup window will prompt you to reboot the system to apply the change. Click OK to continue.

After the computer boots up, try installing the game and see the ISDone.dll error.

Delete Temporary Files (Temp File)

Step 1: Press the Windows + X key combination to open the Power User Menu, then press R to open the Run dialog box and enter% TEMP% in it and press Enter or click OK.

Step 2: On the Temp folder window, select all the files and folders in there and then click Delete to delete those files and folders.

Run the Windows Memory Diagnostics Tool

If after increasing the Paging file size the ISDone.dll error persists. In this case, using the Windows Memory Diagnostics tool will help you fix the ISDone.dll error.

Step 1: Click Start, then type Memory Diagnostics into the Search box on the Start menu and hit Enter.

On the popup window, select the option Restart now and check for problems.

Step 2: After the computer restarts, the system will display a blue screen running the RAM test. Once the process is finished, you can view the report on the actual state of the RAM and decide what to do.

Also you can use Analyze Resources Performance in Task Manager to analyze computer memory. If it detects faulty RAM or low RAM, it is best to replace or transplant RAM.

Run Disk Cleanup

Windows installation files consume a lot of memory, especially old Windows installation files. Game installation may be interrupted due to insufficient free space, so Disk Cleanup will be a great solution in this case.

Step 1: Press the Windows key, then enter cleanmgr into the Search box and press Enter. On the list of results, select Disk Cleanup.

Step 2: Select the drive you want to scan.

Disk Cleanup calculates how much space you can free up. This process may take a few minutes.

Step 3: In the next window, in the Files to delete section, select all the items and click OK.

Also, you can run CCleaner to clean up junk files again, CCleaner is a system cleaner, optimizer, removal software and many other benefits that you can exploit.

Solution Fix ISDone.Dll Error Related to DLL File

DLL stands for Dynamic Link Library, which supports the execution of many tasks on the Windows operating system. The System32 folder in the installation drive includes all the .dll files assigned to different functions. Usually the game also contains .dll files, but when your CD or DVD drive fails, there are many problems. If there is an ISDone.dll error on Windows 10, here are some ways to fix it.

Invalid Virus Removal Programs

Windows Firewall and Windows Defender help protect your system from malicious files, but sometimes it also prevents you from installing games loaded from different sources. To fix ISDone.dll errors on Windows 10 during game installation, try disabling Windows Firewall and Windows Defender to see if the problem is resolved.

Step 1: Press the Windows + R key combination to open the Run command window (or alternatively, press Windows + X to open the Power User Menu, then press R to open the Run window).

Enter the following command in the Run window and press enter:

ms-settings: windowsdefender

Step 2: Select Open Windows Defender Security Center in the right pane of the Settings window.

Step 3: The screen will display a new window, where you click on Virus & threat protection. On the next window, select the link Virus & threat protection settings. Then convert the Real-time protection option to OFF.

The steps above to disable Windows Defender. The next step you need to do now is disable the firewall (firewall).

Step 4: Click the Home icon on the left of the Windows Defender Security center. Then scroll down to find and select Firewall & network protection.

Step 5: Click on Public network and switch to OFF. Similarly select Private network and switch to OFF.

The error of ISDone.dll on Windows 10 no longer appears during the installation of the game.

Important note: 3rd party anti-virus software can also cause conflicts with game installation files, so you must also disable or uninstall that third-party antivirus software. if installed).

Run System File Checker

In some cases the loss may be due to system files being corrupted. In this case you can run the SFC / SCANNOW command to check the computer system and fix the error.

Step 1: Open the Command Prompt under Admin. To do this, click Start, and then type cmd into the Search box. On the list of search results, right-click on the command prompt and select Run as administrator.

Step 2: Next enter the following command into the Command Prompt window and press Enter and wait until the command is executed:

sfc /scannow

After your computer restarts, try to reinstall the game and check if the ISDone.dll error is present.

Re-register the ISDone.Dll file

Damaged or corrupt ISDone.dll files can also be the main cause of this, so in this case you will have to re-register the ISDone.dll file to fix the problem.

Step 1: Open the Command Prompt under Admin. To do this, click Start, and then type cmd into the Search box. On the list of search results, right-click on the command prompt and select Run as administrator.

Step 2: In the Command Prompt window, enter the following command and press Enter to re-register the ISDone.dll file:

regsvr32 Isdone.dll

If you receive the error message “unarc.dll returned an error code -1 ERROR: archive data corrupted (decompression fails)”, run the following command:

regsvr32 unarc.dll

Fix Isdone.Dll Error By DLL File

This method applies in cases where the DLL file is missing or damaged.

Step 1:

– If you can not fix Isdone.dll on Windows 10 with the above methods, you can try replacing it with a new Isdone.dll file by downloading HERE.

If you receive an error message unarc.dll, you can also replace it with the new unarc.dll file HERE.

Step 2: After downloading 2 files, right-click each file, select Extract or unzip to extract the files.

Step 3: Navigate to the installation drive and look for the directory C: / Windows / System32. Copy the files you just extracted and paste into this folder.

Fix Err-Connection-Refused and Err_Connection_Closed Errors on Chrome Browser

Sometimes in some cases when you are visiting some Web sites on the Google Chrome browser, you receive some error messages such as err_connection_refused, Err_Connection_Closed, and inaccessible.

There are several possible reasons for this connection failure, either because of a DNS problem, a proxy server problem, or a browser connection failure.

To fix this, you can apply some methods such as clear browser cache, check proxy settings and disable firewall.

Part 1: Err_Connection_Closed bug fixes on Chrome browser

1. Use Command Prompt

Open the Command Prompt by right-clicking on the Desktop and holding down the Shift key and clicking the Open command windows here.

Enter the following command and then press Enter:

netsh winsock reset

Open your Chrome browser and check for errors. If the error persists, enter each of the following commands and press Enter:

ipconfig /release

ipconfig /renew

ipconfig /flushdns

ipconfig /registerdns

After the above commands have finished executing, reboot your system. These statements are used to clear your system cache and to connect to the ISP.

2. Clear your browser cache

1. On the Chrome browser window, click the 3 dashboard icon in the top right corner and select Settings.

2. Next on the Settings window, scroll down to find and select the Advanced Settings option.

3. On the Advanced settings page, click the Clear browsing data option. This time a popup window will appear on the screen.

4. At this popup window click Cookies and Plugin Data and Cached Images and Files, then click Clear Browsing Data to continue the steps.

5. Finally, check for errors on the Chrome browser.

3. Assign the IP address manually

If you have applied the above solution and still do not fix the error, you can apply the final solution is to assign IP address.

1.Right-click the network icon in the system tray, select Open Network and Sharing Center.

2. Next click on your network connection.

3. At this point, a popup window appears, click Properties.

4.Next select Internet Protocol Version 4 (TCP / IPv4) and then click on Properties.

5.A new popup window will appear on the screen, where you will select the following DNS server addresses, then enter the following values:

  • Prefer DNS Server: 8.8.8.8
  • Alternate DNS Server: 8.8.4.4

Do not forget to select Validate Settings Upon Exit and click OK.

6. Finally open the Chrome browser and see if the error still appears?

Part 2: Fix err_connection_refused

1. Clear the Chrome browser cache

The expired Chrome browser cache may be a reason for blocking the Web site you want to visit. To fix connection refused, you should proceed to clear all cache on Chrome browser.

To clear the cache on your Chrome browser, type chrome://settings/clearBrowserData in the Chrome browser address bar, then press Enter.

At this point, the screen appears Clear browsing data. Here you can select the two options Cookies and other sites and data plugins and Cached images and files and then select the button to clear the browsing data.

2. Check the proxy server settings

To check your proxy server settings, go to Control Panel, then click on Internet Options.

On the Internet Properties dialog box, switch to the Connections tab and select LAN settings.

Next, uncheck the option under Proxy server.

3. Disable the firewall or anti-virus software

Sometimes, firewalls or anti-virus programs can block unsafe Web sites so you can not access them.

If you have applied the above two methods that you still can not fix the Connection Refused error, in this case you can apply how to disable the firewall or anti-virus programs.

Go to the Control Panel and select the Windows Firewall, then click the Turn Windows Firewall on or off link in the left pane to disable the firewall.

You can also close or quit antivirus programs on your computer.

 

ERR_SSL_VERSION_OR_CIPHER_MISMATCH: How to fix

If you are experiencing an error ERR_SSL_VERSION_OR_CIPHER_MISMATCH when using SSL, we understand your status at this time. You may be upset, angry. And I guess whoever falls into the situation as you will also react like that. And the article will help you fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH.

Upon learning about this error, the failure to use Google and Mozilla’s RC4 encryption caused an ERR_SSL_VERSION_OR_CIPHER_MISMATCH error. So, there are four feasible solutions to get this error out of your system.

I know you want to fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH right now and that’s why I will not waste your time. But before you get to fix, there are a few things to keep in mind. These are:

  1. If a fix does not work, try the next one.
  2. Some of these fixes are not completely secure as they allow older, less secure protocols.

Solution 1: Enable all versions of SSL/TLS

Note: This step involves allowing older protocols, which may make the web unsafe. Take risks at your own risk.

  1. Open Chrome
  2. Click on the three dots you see in the top right corner
  3. Now go to Settings and search for ‘proxy’ in the search field
  4. You will see the Open proxy settings option, click on it
  5. Go to the Advanced tab
  6. Now mark all SSL & TLS versions
  7. Press the Apply button
  8. Restart Chrome

[Note: Although we offer this solution as a viable solution, I can not stress that this is a dangerous decision. Older versions of TLS and especially SSL exist for vulnerabilities. The better way is to contact the site owner and ask them to update their SSL / TLS settings to support only modern protocol versions. You really should not connect to anything before TLS 1.2 at this point. For clarity, we do not recommend enabling outdated SSL / TLS versions on your browser. For all intentions and purposes, this proposal, as well as Solution 2, is being presented for educational purposes

Solution 2: Disable Web Protection in your Antivirus/Firewall

We can not give you step-by-step instructions for this as they will be different for each firewall/antivirus. You can find what you are looking for on the web site of the provider.

As we did in the first step, here too, you will have to enable all versions of SSL & TLS.

Solution 3: Disable QUIC Protocol

  1. Search for chrome://flags/#enable-quic in the address bar
  2. Disable the Experimental QUIC protocol
  3. Relaunch Chrome

Solution 4: Clear your SSL status

  1. Open Chrome (obviously!)
  2. Click the three dots you see in the upper right corner
  3. Now click Settings
  4. Now go to Settings and search for ‘proxy’ in the search field
  5. You will see the Open proxy settings option, click on it
  6. Go to the Content tab
  7. Click Clear SSL state
  8. Relaunch Chrome

I hope one of these four solutions helped you fix ERR_SSL_VERSION_OR_CIPHER_MISMATCH. If this still does not help you leave a comment below so we can help you

ERR_CONNECTION_TIMED_OUT: How to fix

For Google Chrome users, there are very annoying bugs that not everyone knows how to fix. Today we has ERR_CONNECTION_TIMED_OUT or ERR CONNECTION TIMED OUT instructions for this situation.

What is ERR_CONNECTION_TIMED_OUT?

What does connection timed out mean?

Connect timed out means that the connection exceeds the specified time. Chrome, Chrome, UCWeb default browser will “wait” for about 1 minute since the connection. If the server or the internet has problems and the web site does not return data to the browser, when the timeout expires, the browser will display this error to the user instead of letting the user wait for more.

When we encounter this error, we can not immediately determine whether the error is due to network or error by the website, but by following the steps as blogtip.org guide below you will succeed and access the normal network.

Error due to network

This is a rare occurrence, not a failure. Because our network has a problem, too slow to send and receive requests from the server side of the website. Error ERR_CONNECTION_TIMED_OUT due to a faulty network that will appear when we visit any website, including Google.com and Facebook.

How to fix network inaccessibility: Turn off the modem with the power button or directly pull the power cord. After about 30 seconds, open / reconnect the power cord as before. Wait 30 seconds for the modem to receive the network, maybe longer. After that time, visit Google or Facebook to check.

If you still can not access any of the websites, please contact the operator to get back to the testing house.

Error due to website

With this error, we can not do anything else … wait for the site to be restored.

One trick to check whether your website is not is to visit http://downforeveryoneorjustme.com/, check another site, enter the website address and press Enter. If you see the message under “is up” means that the website is working normally but you can not go to mean that error by you.

How to fix ERR CONNECTION TIMED OUT?

Normally, we should reload the page to fix the error.

At the top left, click the Reload.

If still not successful, here are some ways to fix it.

#1. Checking connection

Check that your device has wired or Wifi connection.

#2. Clear Cache

Click on Customize and Control icon on the top right corner of the browser. No Scroll down and click on “Show advanced settings”. Now under the ‘Privacy’ section click on “Clear Browsing Data’.

#3. Edit the Host file

The error is because the locked hosts file accesses a number of web pages. The hosts file contains the web links that you want to access. Our job is to find the hosts file and delete the URL that is done.

The location of the file is C:\windows\system32\drivers\etc.

Simply, but you can not edit here, I have to copy and edit with notepad.

– You go to Start —> then right click on Notepad —> select Run as Asministrator.

Select YES.

– The notepad window will appear, choose FILE —> OPEN —> select ALL FILE.

– Click HOSTS —> HOSTS NOTPAD window appears.

– You go to LINK CHOOSE —> delete it.

#4. Flush DNS and Reset IP

Now type ipconfig /flushdns and hit enter.

Then, ipconfig /registerdns and hit enter.

Then, ipconfig /release and hit enter.

Then enter ipconfig /refresh and hit enter.

Finally, run Netsh winock reset this command. Hope. It will help you fix err_connection_timed_out.

#5. Disable Firewall

Check your firewall and internet security to ensure your browser is not blocked from accessing the internet. If you have any web page filtering software installed in your system, then uninstall them.

How to Fix “This extension may have been corrupted” by IDM on Chrome

If you can not download the file, catch the video with Internet Download Manager (IDM) on Chrome because the IDM Integration Module extension is faulty, then you can fix the instructions in the article.

IDM is considered a good download accelerator and is very popular. It allows you to download files faster and can catch the video link is very convenient. This download accelerator is available for download on many browsers through the extension called IDM Integration Module.

However, this extension often has many errors. The most common is the IDM Integration Module is disabled, which makes IDM’s download and video capture inside the browser does not work. If it’s Chrome, you can fix it later.

Option 1: Use the repair function of the utility.

– Press the three dot menu button> More tools> Extension or type chrome://extensions/ into the address bar to open the browser settings extension manager.

– Go to IDM Integration Module> click Repair button to fix the error.

You only see the Repair button when the IDM Integration Module fails with the status line This extension may have been corrupted.

Option 2: If the Repair function does not work, try this method.

– Open the IDM Integration Module installation page on the Chrome Web Store.

– Click the Enable this item link and it will immediately fix the broken IDM extension in Chrome.

Then, check out the Chrome extension page and see that the IDM extension has been successfully re-enabled.

Option 3: Uninstall the IDM Integration Module if the error persists.

– You click Remove from Chrome from the IDM Integration Module installation page.

– Click Details> Remove extension> Remove the IDM Integration Module in the Chrome extension management interface to remove.

You can right-click the IDM icon in the toolbar> Manage extensions to quickly access the detailed interface of the IDM Integration Module.

After uninstalling, reinstall the IDM Integration Module from the installation site of the Chrome Web Store or external installer (drag and drop IDMGCExt.crx in the IDM installation directory into the Chrome extension management interface). This way, you can fix the same problem on other browsers.

Method 4: Update IDM

You can also try to update IDM to the latest version to fix the problem. Open IDM> Help> Check for updates. If you are using an older version, it will start downloading and installing the latest version as well as fixing an existing one (like replacing the broken IDM Integration Module).

Method 5: Keep IDM Integration Module is a safe file before Windows Defender

Sometimes the system defender is Windows Defender mistakenly labeled IDM Integration Module as the virus, so the program will quarantine this extension and cause inactivity error. This case was presented by TNS and corrective instructions that you can review in this article.

How to fix “Something Happened 0x80070002 – 0x20016” when upgrading to Windows

Something Happened When Upgrading to Windows 10 – Since Windows 10, many users have upgraded to the operating system, but in many cases have encountered unexpected errors. Upgrade to Windows 10, which has something like “Something Happened 0x80070002 – 0x20016” when upgrading to Windows 10 or something.

What to do to fix “Something Happened 0x80070002 – 0x20016” when upgrading to Windows 10? Will not have to reinstall from the beginning, while upgraded version from windows 7 or 8 with Windows license? Some of the remedies that will be featured in the blog post below will hopefully help you!

“Something Happened” fixes when upgrading to Windows

In the previous article on Windows tricks I have instructed you how to upgrade to Windows 10 when “Windows update” does not work so you can easily upgrade to Windows 10 from the operating system Windows 7, 8. Next In this article I will guide you how to fix “Something Happened” when upgrading windows 10 most effective.

Method 1: Run the Windows Media Creation Tool again

If you are using the Windows 10 Media Creation Tool to upgrade to Windows 10 you do not try to run this tool again by right-clicking the “MediaCreationTool.exe” tool> Select “Run as administrator”.

“Something Happened” fixes when upgrading to Windows 10

And maybe the error “Something Happened 0x80070002 – 0x20016” will be fixed, if the tool does not work then apply the next method.

Method 2: Change the location on your system

First press the Windows + R key combination to open the RUN dialog box and then type “intl.cpl” in the Open box and then Enter (or click on Control Panel> click Region) to open the Region window.

In the window that appears, select the Administrator tab> Click Change system locale …

Under Current system location> Click English (United States)> Click OK.

Also go to the “Administrator>” tab. Click “Copy settings” … Click on “Welcome screen and system accounts” and “New user accounts”> Click “OK” and then “Something Happened 0x80070002 – 0x20016” will be fixed.

Method 3: Disable or remove the virus program

If you are still facing this problem, it could be due to your antivirus or any other security software program that can stop the tool from downloading and installing Windows 10.

Therefore, try to temporarily disable the virus program or quit the security mode. If you can not disable it, uninstall from “Control Panel -> Programs and Features”. And maybe the error “Something Happened 0x80070002 – 0x20016” will be fixed.

Method 4: Interfering with Regedit

First press the “Windows + R” key to open the Run dialog box and type “Regedit” in the Open and Enter fields.

Registry Editor window appears, find the key under the following path

 Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade 

Then create a DWORD (32-bit) Value if your Windows is 32 bit. By looking in the right pane, right-click New> DWORD (32-bit) Value, and then save the key as “AllowOSUpgrade”, fill in uppercase and lowercase.

Continue to double click on the newly created and change the value again by 1> click “OK”. Close the Registry Editor window Then go to Start> All programs> Windows Update and proceed to update. And finally let’s wait to see the results? If the error persists, please review the operating system license, or network connectivity issues.

How to fix “0x803F7003” in Windows Store 10 when downloading Apps

Downloading Apps – You have upgraded to Windows 10 from Windows 7 or 8 licenses, but when you’re done you do not know why some nasty bugs have occurred. Make sure you do not feel hungry for Windows 10. But you have to upgrade to upgrade now and then downgrade it or not, but if used then the error!

And one of the common mistakes you get is “0x803F7003” in the Store when you download apps. You receive this message in the hosting application and you can not proceed with the download. So how to overcome this problem? Please follow the methodology blog tips below, hopefully it will help you in the problem of loading the application caused when you upgrade to windows 10.

How to fix “0x803F7003” in Windows Store 10 when downloading Apps

In the previous article on computer tips I have instructions on how to change the default browser on windows 10 so you can change the default browser when using Windows 10, continue in the article today. will guide you how to fix “0x803F7003” in Windows Store 10 when downloading the most effective.

#1 Reset the Store cache

First open the Start Menu> type “wsreset” into the search box you will now appear in the related list> Right-click choose “Run as administrator“.

Executed at the highest level. You may see this tool message reinstall Windows Store> Click Yes, and the Store will be reset. Now you can download the app from the Store without problems or bugs.

# 2 Execute by command

To repair the Windows 10 Store by Command Prompt, follow these steps. First press the “Windows + X” key combination. A panel of functions appears> Click Command Prompt (Admin). Then copy and paste the following command into the Command Prompt window> Press Enter.

PowerShell -ExecutionPolicy Unrestricted -Command “& {$manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}”

When you’re done, restart your computer and download the app from the Windows Store.

# 3 Reinstall the Microsoft Store

As you know, can not uninstall Microsoft Store. Microsoft does not allow users to intervene in the Windows Store because Microsoft is leveraging its app store as a major product. However, you have at least one option to reinstall Microsoft Store with the help of PowerShell and that is a complicated and lengthy command.

First open the Start Menu> type “PowerShell” in the search box you will now appear in the related list> Right-click choose “Run as administrator“.

Then copy the following command and paste it into a terminal window:

GetAppxPackage allusers Microsoft.WindowsStore | Foreach{AddAppxPackage DisableDevelopmentMode Register $($_.InstallLocation)\AppXManifest.xml}

Finally, restart the computer to test the results.

# 4 Check the system time

Timelines and areas are important if you want to make full use of the features of the Microsoft Store. The full feature plan is only supported in U.S. countries, so you should transfer your regional settings to the U.S. Also, make sure you have set the right time.

First, press the Windows + I key combination to open the Settings> Time & language> Properties window. In the “Date & Time section” property, activate the “Set time automatically” and “Select time zone automatically”.

Continue to select “Region & language” then in the “Country or region” attribute change to “United States”.

# 5 System updates

Updating the system is essential to ensure the system is operating smoothly and smoothly. The Windows 10 update is fully automatic, but you can check for updates manually and update the system accordingly.

First, press the Windows + I key combination to open the Settings application window> click Update & Security.

In “Windows Update”> click “Check for updates” to check the system.

# 6 Run the troubleshooter

With the advent of Windows 10, users can solve the problem by running the debugger. First, press the Windows + I key combination to open the Settings application window> click Update & Security.

Select “Troubleshoot” on the left side of the window, scroll down and look for “Windows Store Apps”> click “Run the troubleshooter” and wait.

# 7 Reset the system

Windows 10 comes with the “Reset this PC” function, which restores system values ​​as well as initial system settings. First, press the Windows + I key combination to open the Settings application window> click Update & Security.

Select “Recovery” on the left of the window, in the “Reset this PC” attribute click on “Get started”.

Then execute the option to reset, after doing a re-check the problem. These are the most effective ways to fix the “0x803F7003” error in the Windows 10 Store when downloading apps.

Fix Error 0x8007042B on Windows 10 Update

When you update Windows 10, if you get the message Something went wrong, error code 0x8007042B, may be due to many reasons.

In addition, this error code may appear in a variety of scenarios, including upgrading to new feature updates or new releases using the Media Creation Tool or the Windows Update Assistant.

Sometimes the error code can be followed with a sub code that may be similar to 0x2000d. However, the core issue remains the same. In this tutorial we will share how you can solve Windows 10 Update Error 0x8007042B.

Fix Error 0x8007042B on Windows 10 Update

Look through the list and make sure to click the Update button again after each one.

1. Run the DISM tool

When you run the DISM (Deployment Imaging and Servicing Managemen) tool, it will repair the Windows System Image and Windows Component Store on Windows 10. All systems are inconsistent and the above errors are fixed. You can use Powershell or Command Prompt to execute this command.

2. Run System File Checker

This will fix the corrupted Windows files. You will need to run this command from the advanced cmd, ie the command prompt is started with administrator privileges.

3. Turn off the antivirus software

Antivirus and antivirus software are known to enable error codes when updates are in progress. You can either disable that software or completely uninstall it until you fix the update.

4. Restart the BITS service

BITS or Background Intelligent Transfer Service is part of the Windows Update service, manages the download of the Windows Update background, scans for new updates, and more. If Windows Update fails repeatedly, you may want to restart the BITS service. You will need administrative privileges to complete this.

  • Open Windows Services by typing services.msc in the Run window and pressing Enter.
  • Search Background Intelligent Transfer Service. Double click to open Properties .
  • In the Properties window, set the Startup type to Automatic (Delayed) and click Apply. Then, use the Stop button to stop the service and then use the Start button to restart the service.

5. Create Windows 10 ISO media

You can re-download the ISO files from the Microsoft server and then create usb install windows 10.

6. Contact Microsoft Support

If nothing useful, you may want to contact Microsoft Support. There are many different options. Choose a way that best fits your situation and exchange your problem with them.

Error 502 Bad Gateway: How to fix?

When we visit a website, the browser sends a lot of requests to the web server. A 502 Bad Gateway error is an HTTP status code, which means that a server receives an “invalid” response from another server.

502 bad gatewway nginx error fix

Similar to 500 internal server error or 503 service unavaiable error, this error makes you extremely headache, I have experienced it. So, I am writing this article so that we can focus on the reason and how to solve the 502 bad gateway error.

2. Signs and causes

Sign

A 502 bad gateway means the original server sends an invalid response to another middle server such as a gateway and proxy. Since all web requests are routed through multiple gateways, it can be very difficult to know exactly where the error is or what process causes the error. However, there are several ways you can refer to fixes:

502 Bad gateway error on each site will be different. However, if you encounter a Bad Gateway error, you will see one of the following error messages:

    • “502 Bad Gateway”
    • “502 Service Temporarily Overloaded”
    • “Error 502”
    • “Temporary Error (502)”
    • “502 Proxy Error”
    • “502 Server Error: The server encountered a temporary error and could not complete your request.”
    • “HTTP 502”
    • “502. That’s an error.”
    • “Bad Gateway: The proxy server received an invalid response from an upstream server.”
    • “HTTP Error 502 – Bad Gateway”

  • “Fail Whale” is one of Twitter’s notorious “bugs”, and the nature of the error is the 502 Bad Gateway.
  • Bad Gateway error in Windows Update typically generates error code 0x80244021 or WU_E_PT_HTTP_STATUS_BAD_GATEWAY error message.

Causes

Typically, Bad Gateway errors occur because of problems between servers online that you can not “control”. However, still have some reason by users.

How to fix 502 Bad Gateway Error

As mentioned above, the cause of 502 Bad Gateway error is due to server error is congested network or due to some problem that you can not control.

To fix this you can refer to some of the solutions below:

1. Reload the website

Try reloading the URL code again by pressing the F5 key, or by clicking the Refresh / Reload button.

The 502 Bad Gateway error has occurred because the server is temporarily down for upgrade, it is only a temporary error, so you can apply the page reload solution again to fix the error. Also, you can check is website down here.

2. Delete Browser Cache and cookies

Outdated files or corrupted files stored in your browser may be the cause of the 502 error. In this case, just delete the cache files and try reopening the page you want. Access is complete.

Refer to the steps for clearing your browser cache and cookies here.

3. Use a different browser

Change other web browsers or in incognito mode. It will show you whether the error is on the browser side or not.

4. Flush DNS

The 502 bad gateway error can also be caused by a DNS-related problem, such as an incorrectly cached IP address. So to fix the flush you DNS. Here is a tutorial on how to flush DNS on Windows, Mac, and Linux.

You can also try using DNS instead of the default DNS like using Cloufare Public DNS.

5. Start the browser in Safe Mode

When your browser runs in Safe Mode, it means that the browser will run the same default settings, without add-ons, extensions and toolbars.

While running the browser in Safe Mode, if no error 502 then you can confirm that the cause of the error 502 is due to the extension or browser settings. You just need to reset your browser settings to default or disable the extensions that caused the error.

Note: To run the browser in Safe Mode, simply boot your Windows machine in Safe Mode and run any browser you use.

6. Try on another device

If none of the above methods helps you to remove the 502 bad gateway that appears on the screen, try testing it on another computer or phone, preferably using another network such as 3G/4G. This is the last step to test whether the error is due to your computer or not.

7. Use Software Update 1 for Microsoft Forefront Threat Management Gateway (TMG) 2010 Service Pack 1

If you have installed MS Forefront TMG SP1 and during the process of accessing a website you receive an Error Code: 502 Proxy Error. Lỗi mạng mạng. (1790) or other similar error messages.

You can then download and install Software Update 1 for Microsoft Forefront Threat Management Gateway (TMG) 2010 Service Pack 1 to fix the problem.

Download Software Update 1 for Microsoft Forefront Threat Management Gateway (TMG) 2010 Service Pack 1 and install it here.

Note:

This solution is not a general solution to fix 502 Proxy Error error that only applies in some specific cases.

Restart your computer

Some temporary crashes in your computer connected to the Internet may cause a 502 error. This is very simple, just restart your computer to fix the error. .

9. Restart the network equipment

In some cases, problems on modems, routers, switches, or other network devices may also cause a 502 error or a 502 Bad Gateway error. In this case you just need to reboot the device: modem, router, switches … is done again.

10. Change the DNS

Change DNS on Servers (servers), or your router, computers, or devices. Sometimes Bad Gateway errors are caused by temporary problems on DNS Servers.

11. Contact the site directly

This is also one of the best solutions to fix the 502 Bad Gateway. It is possible that in many cases the site is faulty and the site administrator has not fixed the error, and this is the cause of the 502 Bad Gateway error.

You can visit the Website Contact Information page to view contact lists for some popular websites today. Most websites have social networking accounts used to support their services, some of which include email and phone numbers for users to contact.

12. Contact your Internet Service Provider

The final solution to the 502 Bad Gateway error is to contact your Internet Service Provider to find out the cause and fix the problem.

Epilogue

In this tutorial, we learned about the 502 bad gateway error and how to fix it in simple yet effective ways.

If you have any other tips, or solutions to this problem, please share with everyone by leaving comments below.

How to fix 0x80240031 error on Windows

Recently, various versions of Windows 10 encountered a lot of errors that cause the system to crash or stop updating, including errors 0x80240031 on Windows 10 cause the system to loop and you can not update anymore.

Error 0x80240031 on Windows 10 occurs on both the Surface and the PC, the All in One runs on Windows 10. During the run, the update versions suddenly announce 0x80240031 and then fall into the endless loop that causes the user Unable to update Windows 10.

To fix the 0x80240031 error in Windows 10 we need to remove the update feature of Windows 10 as well as reset the process of updating Windows 10 then update again. Although 0x80240031 error on Windows 10 does not annoy the user but makes Windows 10 lose the convenience of upgrading. So if you are a regular update, update Windows 10 should not be overlooked this article.

ERROR 0X80240031 ON WINDOWS 10, FIX ERROR 0X80240031 FAILING UPDATE WINDOWS

Step 1: To fix error 0x80240031 on Windows 10, you must turn off the Update function of Windows 10 before offline. Open the Start Menu and type in “settings” and access the search results.

Step 2: In the Settings section of Windows 10 choose Update & security.

Step 3: Next you go to Windows Update to customize the parameters related to the update of Windows.

Step 4: In the Windows Update section select Advanced Options.

Step 5: Continue into the subfolder of Advanced Options as Choose How updates are delivered.

Step 6: Go to Choose How updates are delivered and turn it off.

Step 7: To remove the update version of the bug, the component causing the update error as well as causing error 0x80240031 on Windows 10, you download the Reset Windows Updates application here: Download Reset Windows Updates.

After downloading Reset Windows Updates complete, open the software using Admin – Run as Administrator.

Step 8: A blue DOS screen appears, type Yes to run.

Step 9: In this there are many features you can apply to fix error 0x80240031 on Windows 10, the first thing to do is to select number 5 – Scan all protected system files to check the error file.

Step 10: Wait for the software to scan the error, press any key to continue running.

The process of shutting down the Update will take a few minutes, you keep the screen to avoid the app suspended.

Step 12: Finally, select the number 16 to reboot, end the error fix 0x80240031 on Windows 10.

The machine will restart automatically within 60 seconds when you perform this operation.

After rebooting, you try to re-enter Windows Update and update Windows to see error 0x80240031 on Windows 10 has been removed completely offline.

We have completed repair work 0x80240031 on Windows 10, your computer can update the version of Windows 10 as usual as well as update the regular patch of Windows 10.

Fix Can’t Connect to Proxy Server on Windows 10

Sometimes in some cases when using a Windows 10 computer to access a Web page in a browser, users often encounter the Can not connect to the proxy server error .

This error prevented you from visiting your favorite sites. If you have tried the virus scan and found no problem then the probability is due to the proxy settings on the computer.

So how to overcome this error and connect to the Web site you want to access? Let’s see some way to fixes Can not connect to the proxy server.

Option 1: Disable Proxy Server

To disable Proxy Server, first click on Start button, select Settings .

In the Settings view, select Network & Internet, then select Proxy in the left pane list. You will now see the Manual proxy server option. Here you turn off the Use a proxy server feature.

You can now open your browser and try to access any website you want. If you can not do it this way, take a look at the ways below.

Method 2: Check Internet Properties

Press Windows key + R, enter inetcppl.cpl > OK (You need to run it under admin). Or you can also click Start > enter iexplorer.exe > right click on Internet Explorer and select Run As Administrator.

Open the Connections tab > LAN Settings . Make sure  “Use a proxy server for your LAN” is not selected, if it is selected, uncheck it> check Automatically detect settings > OK > Apply > OK.

You open the Advanced tab of the Internet Properties window> click the Reset button> check Delete personal settings and press the Reset button again.

Restart the computer and check whether the error Can not connect to the proxy server is empty, if not you use the following ways see offline.

Method 3: Use the Windows Registry

Right-click on the Start button and select Run . On the Run command, type regedit and then click OK to open Registry Editor.

At the Registry editor interface you navigate through the key:

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\InternetSettings

On the screen you will see all the Registry values. Your task is to find and delete files:

  • Migrate Proxy
  • ProxyEnable
  • ProxyServer
  • Override proxy

Right-click on the values ​​and select Delete. Once the files have been removed, restart your computer.

Method 4: Use Command Prompt

You open the Command Prompt by admin, when the window opens, enter the command:

ipconfig /release 
ipconfig /renew

After the commands are executed, you close the cmd window, and see if the problem is resolved. Many users have reported that this simple solution has fixed their bug. Please try it too.

System Restore

If the above solution does not fix the problem, you can use the System Restore tool to fix the problem. System Restore allows you to restore your computer back to the original update state.

Right-click the Start button , and then click Run .

In the Run window, type rstrui.exe and click OK. At this point a new popup window will appear, at this window you can select the date to restore is finished.

Factory Reset

In any case, if you can not fix the problem on Windows 10, you can perform a factory reset (or else reset it entirely). Factory reset means that your computer will return to its original state as it was purchased.

Just click the Start button and select Settings . In the Settings view, select Update & Security and then select Recovery . Select Get Started to perform Factory Reset.

After selecting Get Started, two options will appear on the screen:

  • Keep my files
  • Remove everything

You should choose the first option because it is not necessary to delete all the files, just remove the applications and settings is enough.

0XC1900101-0X30018 ERROR CODE WINDOWS 10 UPDATE

0XC1900101-0X30018 is the error message what you would get while installing a Windows 10 on your Windows 8 or Windows 7 machine.
Now there might be a instances where you are trying to upgrade your windows from windows 7 to 10 or Windows 8 or Windows 8.1 to Windows 10 and while installing windows 10 you might get an error message saying that.

The Windows 10 error code 0XC1900101 or 0X30018 or probably now you might get an error message saying that we couldn’t install a Windows 10.

Now I’m going to talk about some of the quick fixes which will help you to install Windows 10 on your on your computer now.

How to fix 0XC1900101-0X30018 ERROR in Windows 10 UPGRADE

#1. Disconnect all your external devices

The first thing what you will have to do is you will have to go ahead and disconnect all your external devices from your computer.
In case if you have an external hard drive or if you have an external keyboard, mouse, an HDMI cables connected you will have to go ahead and disconnect it.

And once you have disconnected all the external devices or parity riyals.

#2. Update your Display adapter

The next thing what you will have to do is you will have to Press Windows+R, type hdwwiz.cpl to open device manager. Device manager is nothing, but it will show up all the devices which are present on your computer.

The first thing what you will have to do was you will have to go and update your display driver.

In case if you have n video or graphic card or in case if you have other graphic card. what you will have to do is you will have to do a right click on it and click on update driver.

Once you if you have once you have updated the driver and also you cannot if case if you have the default graphic card you can go to and upgrade that as well along.

With that what you will have to do is you will have to once you have upgraded this you will have to close this window.

#3. Uninstall security software

And you will have to go ahead and uninstall your security software from your computer in order. To do that you will have to open
Programs and Features. The quickest way to open it is you will have to press Windows + R key simultaneously, which
will open up Run window. Or else you can in the search box you can type “run”.

Once you open run type appwiz.cpl. Now this will open up the list of software’s which you have already installed on this computer.

Now what you will have to do is you will have to look for the security software which has been currently installed.

In my case I have McAfee WebAdvisior are install. So you might have avast or AVG or norton.  So you will have to go ahead and uninstall it.

All you have to do is you will have to highlight this, do a right click and click on uninstall. So you will have to uninstall those
software’s completely.

And in case if you have Dropbox please go ahead and uninstall that as well. Because at times even that stops the Windows 10 installation.

Now once that has been done now you will have to close the programs and features window,and then or you will have to go ahead and restart your computer in clean boot.

#4. Used msconfig to clean boot Windows 10

Open Run window, type msconfig, click on OK.

In case if you are getting user access control prompt click on yes, or allow now on this window you will have to go ahead and select Selective startup.

And then go to services hundred services you will have to check the box which says hide all Microsoft services.

So what this will do is it will hide all the Microsoft services. So only thing which will be enabled here is non-microsoft services.

Once you will have to click on disable all.

And then go to start one then go to Startup tab, here Open Task manager and disable the startup items. In case if you have any of the startup items enabled here, you will have to go and disable.

To disable, Highlight Item and click on Disable.

Disable utorrent web

Don’t disable your graphic cards, all that stuff keep it as
it is only for the software’s which you
are using.

The next thing what you will have to do is you will have to close this window, click on Apply and then click on OK.

In case if you get a prompt to restart your computer, you will have to go ahead and restart your computer. Because if clean boot will be completed only when your computer is restarted, until unless no changes will take place.

So once you have restart your computer, try installing a Windows 10 from using the ISO file or media creation tool.

  • In case if that works well and good.
  • In case if that doesn’t work what you will have to do next step.

#5. Run Check disk on your computer

So what you will have to do is you will have to
press Windows+R and type CMD.
That is command Prompt, do a right click on CMD and click on run as administrator.

  • In case if you get user access command prompt, click on yes.

In the command prompt window, you will have to type chkdsk and hit Enter.

So which is check this now what this will do is it will check for any
error message on your disk.

In case if there are any error message or bad sectors on your disk, it will go ahead and repair it by itself.

This might take about 20 to 30 minutes based on the performance of the computer and also the amount of files what you have on the computer.

Let’s wait till it is completed. You will have to go ahead and restart your computer and try installing the Windows 10 using the ISO file or using a media creation tool.

So I hope this help you fix error 0XC1900101-0X30018. Hope you have a great day and you take care.

How to fix “NTOSKRNL.exe” 100% CPU Windows 10

NTOSKRNL.exe is a system file of the computer responsible for many tasks such as hardware emulation, memory processing. In addition, it is responsible for managing and compressing temporary files (page files)

to reduce memory usage. If one day you discover that this process is using a lot of resources like CPU, Disk or Memory, please do the following:

NTOSKRNL stands for NT Operating System Kernel and to fix this problem, you try one of the following 8 ways:

1] Scan your computer for malware

At times the machine will be infected with malware, and the malware will sometimes attach to the file NTOSKRNL.exe and will consume a lot of machine resources. In these cases, you need to have a virus scanner to scan these types of malware. In particular, you should try to scan the C:\Windows\System32 folder (where NTOSKRNL.exe is stored).

2] Uninstall unneeded or incompatible programs

Sometimes, you install and run some software is not compatible with Computer. It will cause some abnormal error of the machine.

So, you should find and delete any software that is not compatible with your computer to avoid causing conflicts in the system.

Recognizing is not difficult, a software that is not compatible will often cause machine crash, slow down the machine immediately after installation.

3] Run the DISM command

You can try running the following command with Admin privileges

DISM /Online /Cleanup-Image /RestoreHealth

When you run this command, it will automatically correct errors related to the system image and related components. At that time, all related errors will be automatically corrected. You do not need to do anything else.

4] Turn off Runtime Broker process

RuntimeBroker.exe is a program of the system used to monitor applications to ensure that applications do not harm the security mechanism of Windows. monitors access to Windows API’s and ensure that apps do not violate the core security of Windows. RuntimeBroker.exe typically consumes less memory, but in some cases it consumes a lot of resources and usually does not return memory to Windows, and will cause memory loss and lead to system overload. many resources.

To turn it off, you open the task manager, look for the Runtime Broker name in the Process tab, if it uses more than 15% of the memory, it may have problems, what you need to do is right click on it and select End Task.

[5] Update Drivers

In some cases, incompatibility between drivers and the operating system can also cause full load of the computer, in which case you can try to update the old drivers, I often see the brother This issue when you update from the old windows up. In some cases Windows is too new, you should check if the driver is compatible before updating offline.

6]Use Performance Troubleshooter

To open this application, go to Start / Run, type in

msdt.exe /id PerformanceDiagnostic
Then follow the instructions and let Windows self edit.

7] Check with Clean Boot State

You can debug using Clean Boot, by default Clean Boot will start as minimal as possible, you can start Clean Boot mode, then enable any process you suspect has Can cause full load to the system. Please try each testa case one, hopefully be able to find out which process causes system errors.

8] Use Windows Performance Toolkit to find the root cause

I found this tool quite nice, it is in the Windows 10 Toolkit SDK, brother download here then you can use it to find the cause of this error by running the following command in cmd:

xperf -on latency -stackwalk profile -buffersize 1024 -MaxFile 256 -FileMode Circular && timeout -1 && xperf -d cpuusage.etl

After running this command, the system will record the operation of the computer at a certain speed, and save it to a file called cpuusage.etl in C:\Windows\Systems32.

You can open this file and check the progress of each process related to CPU, Memory …. then if there is an abnormal process, you will be able to test it.

Source: TheWindowsClub

How to fix “Ethernet doesn’t have a valid IP configuration”

Because the router or IP address that users often encounter error “Ethernet does not have a valid IP configuration” on Windows. When this situation occurs, you should use a few ways to fix “Ethernet doesn’t have a valid IP configuration” on Windows to continue using the normal network.

On computers, especially laptops using WiFi connections, we often experience limited WiFi faults, limited connections failing to access WiFi. When you encounter this error, you will not be able to access the WiFi network is connected, even if the correct password was entered.

Users who want to fix Limited WiFi, limit the connection to WiFi can not change the IP address or do some other operations. Because of the WiFi on certain parameters that will be installed different, if the static IP is static IP, you need to enter the static IP to connect to the Internet.

With dynamic IP, you need to switch to dynamic IP self-only mode. Another IP related error that we sometimes encounter is “Ethernet doesn’t have a valid IP configuration”on Window. This error usually originates from the router or by wrongly assigning the IP address. To fix the “Ethernet does not have a valid IP configuration” error, please refer to the following instructions.

HOW TO FIX “ETHERNET DOESN’T HAVE A VALID IP CONFIGURATION” ON WINDOWS:

1. Restart Your Computer To Fix “Ethernet Does Not Have A Valid IP Configuration” On Windows.

This is the simplest way, should use the first if natural computer errors “Ethernet does not have a valid IP configuration”. It is possible that after the reboot will fix this error.

2. Change Your Modem Or Router.

You can change your Router or Modem to try to connect to see the computer also error “Ethernet does not have a valid IP configuration” or not.

You can also turn off the modem for about 30 seconds to 1 minute, then reboot and try to connect to the Internet.

Another way is to switch from a WiFi connection to a wired network.

3. Check The Network Configuration To Fix “Ethernet Does Not Have A Valid IP Configuration” On Windows.

Step 1: Click Start , look for cmd and open Command Prompt with Admin.

Step 2: In the Command Prompt you enter: Ipconfig /All

Then press Enter.

The parameters of the IP, the network address will be appear in the Command Prompt.

Step 3: Next, click the Internet icon in the left corner of the desktop, select Open Network and Sharing Center.

Step 4: Select the connection and right click> Properties.

Step 5: Select the Internet Protocol Version (TCP / IPv4), click Properties to edit. Check if the IP address is 192.168.xxx.xxx or not.

Step 6: Finally go back to the Network Connections section and right-click Disabled to turn off the Internet connection.

And press Enabled to turn it back on.

To do this, check that you have corrected the error “Ethernet does not have a valid IP configuration” on Windows.

 

Fix ERR_CONNECTION_RESET error on Chrome browser

If you encounter ERR_CONNECTION_RESET in Chrome when browsing a few web pages, this means that the browser can not establish a stable connection or absolutely do not have a website you want to open. While some sites open well, others show this error. Connection reset means that when the data is received by the peer computer, in this case, you can not handle it. This post will show you how to fix error 101, ERR CONNECTION RESET in Google Chrome browser on Windows 10/8/7.

Fix ERR_CONNECTION_RESET Chrome

When you see this error message, you’ll also see the following message:

This website is not available, The connection to example.com was interrupted, Error 101 (net:: ERR_CONNECTION_RESET): The Connection was reset

Here are our suggestions on how you can fix it. Make sure to reload the page after each change you make to find what’s right for you. As usual, I will split the troubleshooting steps into two. First for PC and second for Chrome.

Troubleshoot PC network problems

1] Check your network cable, restart the router and reconnect

Basic tips, but sometimes the cause of the problem. Make sure you check that your cable is properly connected to your computer or router. If you connect via WiFi, be sure to restart your router once. Finally, you choose to forget the WiFi you have connected and then reconnect.

2] Delete Proxy:

  • Hit Windows Key + R and enter “inetcpl.cpl” and hit enter to open Internet Properties.
  • Next, go to the Connections tab and select LAN settings.
  • Uncheck Use a proxy server for your LAN and make sure to select “Automatically detect settings”.
  • Click Ok then Apply and restart your PC.

If you are using a third-party proxy service, please disable it and try again.

3] Delete DNS and reset TCP/IP

Sometimes the site does not work because the DNS in your computer still remembers the old IP. So be sure to Flush DNS, and Reset TCP / IP.

To FlushDNS, run the following cmd command:

ipconfig /flushdns

To reset TCP / IP, run the following command on CMD:

netsh int ip reset resettcpip.txt

4] Increase MTU (Maximum Transmission Unit)

Speed ​​up internet also helps. Here, it means you can increase the MTU (Maximum Transmission Unit), RWIN (TCP Window Receive) parameters.

  • Go to Settings> Network & Internet> Ethernet
  • Note Active Wireless / Wired Network Connection, such as Ethernet
  • Open cmd with administrator privileges.
  • Type the following command in CMD and press Enter:

netsh interface IPv4 set subinterface “Ethernet 4” mtu=1472 store=persitent

5] Disable the AppEx Network Accelerator feature

AppEx Networks Accelerator is known to slow down network connections. Many people report that it slows down the network speed by 70% to 80%. It’s best to disable this feature.

  • Go to Settings> Network & Internet> Ethernet> Change adapter options.
  • Right-click your network and select properties.
  • Find AppEx Networks Accelerator and uncheck it.
  • Save and exit to see if the problem is resolved.

6] Delete WLAN configuration (When connected to WIFI network)

When you connect to many networks, all of them are stored on your PC. Next time you reconnect to that network, it will automatically connect. It is possible that one of the networks has been changed, and it is not connected properly, or it may be disconnected from the network. It is best to delete all WLAN profiles and start new ones.

7] Reinstall the Network Adapter Drivers

If deleting WLAN configuration does not work, it is possible that the network drivers are corrupted. You will need to re-install the network adapters and reinstall the network drivers for best results. Windows Update will immediately download the driver and install the new driver.

8] Disable WiFi Miniport

Hit Windows Key + X and select Command Prompt (Admin).

Type the following command in cmd and press Enter after each command:

netsh wlan stop hostednetwork
netsh wlan set hostednetwork mode=disallow

Exit the command prompt then press Windows Key + R to open the Run dialog box and type: ncpa.cpl

Press Enter to open Network Connections and find Microsoft Virtual Wifi Miniport and right-click and select Disable.

Fix Chrome issues

I would suggest a few things here. This will ensure that if there are any malicious software or installations that are restricting the network, it will be handled.

1] Start your browser in Safe Mode

Just like Windows Safety Mode, Chrome also has Safety Mode where Run Mode does not have any user settings and extensions. You can run it manually or just use the keyboard shortcut to launch Chrome in Safe Mode and see if your issue is resolved.

2] Run the Chrome Cleanup Tool

Run the Chrome browser’s built-in cleanup and malware scanner. It helps you remove unwanted ads, pop-ups and malware, Extraordinary Startup pages, toolbars, and anything else that destroys the experience by hitting the webpage by overloading. pages with memory requirements.

Type in the address bar:

chrome://settings/cleanup

3] Reset Chrome settings

This option is similar to Reset Windows 10. When you reset Chrome, it will return to the default settings during the new installation. It will disable all extensions, extensions and themes. In addition, the content settings will be reset. Cookies, cache, and site data will be deleted.

Let us know which solution works for you to resolve the ERR_CONNECTION_RESET error in Chrome.

 

How to fix 0x8024a223 when updating Windows 10

Updating Windows is quite difficult and risky, not only because of this often encountered many bugs that ordinary users do not understand, but also because of the quality of updates released by Microsoft.

Over the past few months, many users have encountered an error updating in Windows Update and almost do not understand what the error is, one of which is error 0x8024a223. Running the Windows 10 Troubleshooter could have been helpful, but in the case of this bug (and some other bugs) it did not work. End users can not update.

In many cases, the solution is just one of two ways: reset or restart Windows Update.

How to restart Windows Update

Usually, when you try to use Troubleshooter, Windows Update has restarted itself because this is one of the ways that this tool fixes the problem. But you should restart Windows Update manually because it only takes a few steps only.

Press the Windows + R key combination and then type services.msc or click Start Menu and type the same. You will see a list of Windows 10 services.

Now scroll down, find and right click on Windows Update, select Restart. It may take a few minutes to restart this service, if the error is in the service, you will now update successfully. It is not necessary to reboot the machine but it is best to do so to ensure that the service is restarted.

Find the Windows Update service of Windows 10 and restart

Use Microsoft Troubleshooting

Microsoft also has a tool to find and fix other problems when updating through Windows Update without being included in the OS. You can download the link below, it is basically just a wizard to detect and fix errors.

Some users say that this Microsoft-released application actually does fix the problem, so it’s worth a try.

This tool does not change anything on your system since it only fixes the basics, including the entire Windows Update. Rebooting is not mandatory but should be done.

In some cases, errors can be caused by not having enough memory, so make sure you clean up your hard drive to make room for the update files. Do not forget to check that some antivirus software also block updates so please temporarily turn off.

The error may also be caused by the installation of Microsoft’s monthly updates, but in this case it is due to an error in the patch, not necessarily in the Windows service.

Download the Microsoft Troubleshooting Tool https://aka.ms/wudiag

Video tutorial:

Can not change display resolution of Windows 10? How to fix it

Windows 10 is the latest version of Microsoft Windows OS, with at least two major updates waiting for Windows 10 in a year. Updates are usually around March to April and September to October.

Obviously, not only the new features are provided by Microsoft whenever there are new updates. Yups, that’s right, there are also issues that you will experience every time you update and one of the problems that WinPoin often has is a screen resolution that can not be changed!

Therefore, on this occasion, Blogtip wants to tell you how to fix the problem. There are at least two effective ways to overcome this problem and here are the details:

Method One (Driver Display Software Update)

First way, first go to Device Manager (right-click on Start and find Device Manager), then make sure that Display Adapter is installed.

If it’s already installed and you still can not change the screen resolution, that means it’s a driver sign (software). The display adapter you used is still in the old version. and does not support Windows 10.

Please update the driver by right-clicking and selecting the driver update option and then you will be faced with 2 options: “Automatically search for driver update software” or “Browse My computer for software drivers “. Just select the first option if you are connected to the internet because later your PC will search for the latest software drivers for you.

Second way (reinstall driver display software)

If the first method does not work, it is a sign that there is a problem with the software driver you have installed. It may be because it is incompatible (or is corrupted) when the driver installation is underway.

If so, then you must manually reinstall the driver display software. Make sure you know what type and brand of display drivers are installed on your PC. If you already know, please uninstall and reinstall the driver.

Well that’s the gaes, 2 powerful ways to fix the problem can not change the screen resolution of Windows 10.

Windows update error 80070422, 0x80070422

If you encounter error 80070422 while downloading Windows update, you need to change the service settings of Windows Update and re-enable the service.

If you encounter error 80070422 while downloading the update, you will need to change the service settings of Windows Update and re-enable the service.Option 1 : Use the built-in  Windows Update Troubleshooter functionality, which fixes some issues with Windows updates and also resolves this issue for you.

However, if this does not work try the second way.

Option 2 : Change or re-enable the Windows Update service  .

You are locked out of the system logon as an administrator to run this step. Therefore, you need:

  1. Open  Administrative Tools:  Open  Control Panel  in  administrative tools   and select  Administrative Tools .
  2. Open  Servies  (left click twice). (Enter  password  or confirm administrator rights if required).  
  3. In the Name column  , look for the Windows Update service name   and  right-  click it to open  Properties .
  4. On the General tab  , navigate to  Startup type  and change the status to  Automatic .
  5. In  Service Status , verify that the request has run. If not, select  Start , enter the  password  or confirm administrative rights if required.

* This method is applicable to Windows 8, 8.1 and 10.

Use the built-in Windows Update Troubleshooter functionality, which fixes some issues with Windows updates and also resolves this issue for you.

Open Administrative Tools

Open Servies

In the Name column, look for the Windows Update service name and right-click it to open Properties.

On the General tab, navigate to Startup type and change the status to Automatic.

How to fix Access Denied on Windows 10

In the process of opening a file or folder on Windows, but you can not open it and on the screen you receive the error message  Access denied. This article will walk you through a number of ways to fix “Access Denied” errors in different situations.

Overview of Access Denied error

This is a fairly common error in Windows related to access, file system, etc. This problem occurs when you can not open the file or directory, the service on the computer can not boot, You can not access the web page, etc. The cause of the error may be due to corrupted files, encrypted files, corrupted user profiles, and so on. Exactly the username and password you use, nor can you open that folder. Error messages vary depending on the issue.

Problem 1: Error 5: Access is denied

Error message 5: Access is denied

When you install an app or game on your computer, you can not access a specific location or edit a file. You try to restart certain services or software but can not. You receive one of the following error messages:

  • “Windows could not start the SSHD service on the local computer.” Error 5: Access is denied.
  • “Error 5: Access is denied.” Error 5: Access is denied.
  • “Unable to execute file in temporary directory. Setup was canceled.” Error 5: Access is denied.

Cause of error Error 5: Access is denied

  • The User Account Control (UAC) window does not grant permissions to the Local user.
  • Existing users do not have sufficient permissions to access.
  • Lack of permission to access remote computer.
  • Time synchronization error.
  • Firewall or third-party software programs can remove the connection to the remote computer.

How to fix Error 5: Access is denied

1. Check that your computer’s date and time have been set correctly

If the date and time on your computer are not set correctly, this could be the cause of many errors on your system, including Error 5: Access is denied. Therefore, to fix the error, the first solution you can apply is to check whether the date and time on your computer has been set correctly.

2. Run the program under Admin

Sometimes some programs require specific permissions to perform actions.

If you are running a program from Start, right-click on any program and select Run as administrator.

– If you run another program, right-click any program, and then click Run as Administrator.

– If you want to run Command Prompt under Admin, just right click on the Start button and select Command Prompt (Admin).

3. Clean the virus on the system

Viruses have a great influence on your system. Once your computer is infected by a virus, it can cause file errors, enable / disable services, disable Windows Firewall, and cause your computer to become infected. Slow down.

Viruses can affect the “core” files that Windows requires to run applications, thus causing Error 5. To make sure no errors occur, you wipe out your system. by the effective antivirus software.

4. Clean up temporary system files and folders

Windows stores junk files in the process of users using the computer and surfing the web. This is also the reason why your computer is slowing down because it stores many junk files and causes errors. 5. To clean up junk files, follow these steps:

1. Press the Windows + R key combination to open the Run command window, then type cmd in it but do not press Enter .

2. Press and hold Ctrl + Shift and press Enter to open Command Prompt under Admin.

3. On the Command Prompt window, enter “cleanupmgr” and hit Enter.

4. Disk Cleanup will begin to calculate the space that the garbage files occupy and display the list on the screen.

5. At this time, you will see a list of junk files. Your task is to select the items that you want to clean up and click OK.

5. Update the driver

If the driver is too old, it could be the cause of the error. So to fix the problem you can try to apply the solution is to update the driver.

To update the driver, follow the steps below:

Right-click My Computer (or This PC in Windows 10), and then click Properties.

On the Properties window you will see the Device Manager in the left pane (on Windows 10, 8x, Windows 7, and Windows Vista).

If you use Windows XP, you will have to click the Hardware tab and you will see the Device Manager.

3. On the Device Manager window, check whether any of the icons on the list are yellow. If right click on it and select Properties. On the Properties window, click on the Drivers taband then click on Update Drivers.

To update all the latest drivers, navigate to the Control Panel, then click Windows Update (on Windows 10, go to Settings => Update and Security and then click on Check for updates). This process will download and install the latest driver versions and install the necessary files on your computer.

6. Encrypt files or folders

Encryption is the best solution to protect your files and folders from unauthorized access. If you can not access these files and directories, the best way is to encrypt files and folders.

Follow the steps below to encrypt your files and folders:

Right-click the file or folder and select Properties. Next on the Properties window, select the General tab and click the Advanced button.

Here you just need to remove the contents of the Encrypt contents to secure data is gone.

If the Encrypt contents to secure data option is selected, you must confirm to decrypt the file and open the file.

7. Regain ownership of files or folders

To regain ownership of files or folders, first right-click on the file or folder you want to open and select Properties to open the Properties window. Here you select the Security tab .

Without access to the directory, on the screen you will see a message asking you to use the Admin privileges to access the directory. Your task is to click Continue to continue. At this point on the screen will appear a popup window containing the options for you to change the owner.

At Section Change Owner to, select the user account or the account your Admins. Next, select the Replace owner on subcontainers and objects.

Click OK, and then the message “You do not have permission to read the contents of the directory.” Do you want to replace the permissions directory with full permissions? All permissions will be replaced if you press Yes.

Click Yes to continue.

You can reset the security mode and allow the necessary access to the contents of the folder and folder.

8. Use Disk Error Checking 

Run CheckDisk command, also known as Disk Error Checking, is built into Windows 8. On Windows 8, Microsoft has redesigned the chkdsk utility – a tool to detect, check, and repair drive partitions. Also on Windows 8, Microsoft also introduced a system file called ReFS that does not require chkdsk offline to fix the problem.

9. Turn off Simple File Sharing (On Windows XP)

To turn off Simple File Sharing, first click Start, My Computer. On the Tools menu, click Folder Options, View.

Next, in the Advanced Settings section, uncheck Use simple file sharing (Recommended) and click OK.

Problem 2: Can not open file or directory

Error message can not open file or directory

When trying to open a file or folder in Microsoft Windows, you can not access and receive error messages such as:

  • “Folder is not accessible. Access is denied” (Folder can not be accessed.
  • You do not have permission to access this folder.
  • “You have been denied permission to access this folder. To gain access to this folder you will need to use the security tab.” (You have been denied access to this directory. To gain access to this directory, you will need to use the Security tab.)

Cause of error can not open file or folder

An “Access Denied” error can occur for one or more of the following reasons:

  • Folder ownership has been changed
  • You do not have the appropriate rights
  • File is encrypted
  • The files are stored on a Windows.old folder from the previous system. This usually happens after your computer is upgraded to a new version of Windows.

How to fix the problem can not open file or folder

Get ownership of files or folders in Windows

Step 1 . Select the file or folder you want to take ownership of and right-click it to select Properties from the context menu.

Step 2 . Select the Security tab and click on the Advanced button , then click on Change. If you are required to provide an administrator password or password, provide a confirmation or a password.

Step 3 . Type in the name of the person you want to grant ownership, and click on Check.

Step 4 . Click OK . If you want this person to be the owner of the folders and files stored in this folder, check the Replace owner box on subcontainers and objects .

Step 5. Click OK .

2. Change access

Often, Access Denied errors involve access or modification of files and directories. If you do not have rights, you can not access the specified location. If you are logged in as an administrator and can not access the directory, you can change permissions. Note: To change permissions you need to login as an admin.

Step 1 . Select the file or folder and right-click to select Properties , then click the Security tab .

Step 2 . Click your name in Group or user names to see the permissions you have.

Step 3 . Select all the options in Allow and click on OK and Apply . Then you will have full control over the file or directory such as editing, reading, executing, listing directory contents, etc.

3. Encrypted files or folders

Encrypting data is one of the best ways to protect your data from unauthorized access. You can not access the encrypted file or folder without the proper certificate. You can check whether the folder is encrypted by:

Step 1 . Select and right-click on specific files or folders to select Properties .

Step 2 . Select the General tab then click the Advanced button . If the Encrypt contents to secure data option is selected, the file is encrypted, you need the certificate to open it.

Problem 3: Rejecting access to files / folders, changing or deleting files or folders

Error message when accessing file / directory

When you delete, copy, move or change a file or folder on your computer, you may be blocked by Access Denied error saying you do not have permission to do so. Error message:

  • “Folder Access Denied.” You need permissions to perform this action. You need permission from TrustedInstaller to make changes to this folder. TrustedInstaller to make changes to this directory).
  • “Destination Folder Access Denied.” You need permission to perform this action.

Causes of rejection errors when accessing files / folders

This error can be due to the following reasons:

  • Files you can not access are being used.
  • You do not have permission to access this file.
  • User profiles may be corrupted.

How to fix denied errors when accessing files / folders

Get ownership by Command Prompt

There are several methods to take ownership of a file or folder and this solution uses the Command Prompt to regain ownership.

Step 1 . Right-click on the Start menu and select Command Prompt (Admin) . If the message enters a password or confirmation, provide the password and confirm.

Step 2 . Confirm the path to the folder you want to take ownership of. For example, you want to take ownership of the Photos folder in drive E and the address is: E: \ Photos.

Step 3 . Type takeown / f “E: \ Photos” (replace the path to your directory), then press Enter .

Step 4 . After the process is complete, restart the computer and check whether the problem has been fixed or not.

2. Delete corrupted files using third-party software

Broken files can not work properly, they can be image files, documents, system files, etc. Many corrupted files can not be repaired or even deleted. Here are the easiest ways to remove corrupted files.

Step 1 . Download, install and launch Eassos PartitionGuru.

Step 2 . Select the corrupted file or folder you want to delete, right click and select Delete Files Directly.

Step 3 . Click the Delete button to delete the selected file. Note that files deleted in this way will not be in the Recycle Bin, so you should delete files that are no longer important.

Tips to prevent corrupted files:

  • Save the file properly. When a problem or error occurs while saving the file, the file may be corrupted.
  • Remove USB storage device safely. Click on Safely Remove hardware and Eject Media before removing the USB device.
  • Turn off the computer properly. To shut down your computer, you should click the Start button and click Shut down instead of pressing the power button directly.

3. Create a new local user account

If the Access Denied problem is due to a corrupted account, you can resolve the problem by creating a new local user account / profile. To create a new account, follow the steps below:

Step 1 . Click the Start menu and select Settings. Click Accounts in Windows Settings.

Step 2 . Select Family & other people on the left and then click on Add someone else to this PC .

Step 3 . Click on the link I do not have this person’s sign-in information and click on Next . On the next screen, click Add a user account without a Microsoft , then select Next . You can now enter your username, password, password hint and select Next .

Issue 4: Receive the error message “Location is not available. Access is denied “

Error message Location is not available. Access is denied

When opening a partition on a computer hard drive or USB device, you can not open it and receive the error:

  • “Location is not available. E:\ is not accessible. Access is denied” (Not available.

The cause of the Location error is not available. Access is denied

  • The file system is corrupted. The file system on the drive is corrupt and therefore inaccessible.
  • You do not have the appropriate rights.

How to fix Location is not available. Access is denied

1. Change the permissions for the drive

Step 1. In Windows Explorer, right click on the partition you can not access and click Properties> Security> Advanced .

Step 2. Click on Add in Advanced Security Settings and on the next screen click on Select .

Step 3. Enter your username and click OK . You can then choose the following:

Type: Allow
Applies to: This Folder, subfolder and files
Basic Permissions: Full Control

Step 4. Click OK  and Apply to save the changes.

2. Recover data from inaccessible drives and format it

If the permissions change does not resolve the issue, you can recover data from inaccessible drives and format it to fix the problem. It’s easy to get data from no location and denied access. Here are the steps to recover data from a corrupted disk.

Step 1. Install and launch Eassos PartitionGuru, then check if the partition is live or not. If not, move on to the next step.

Step 2. Select the unreachable drive and click the File Recovery button from the toolbar. Make sure you select the correct partition.

Step 3. Select Complete Recovery mode and click the Start button to start the scanning of files and folders in the selected partition.

Step 3 . Click the Delete button to delete the selected file. Note that files deleted in this way will not be in the Recycle Bin , so you should delete files that are no longer important.

Tips to prevent corrupted files:

  • Save the file properly. When a problem or error occurs while saving the file, the file may be corrupted.
  • Remove USB storage device safely. Click on Safely Remove hardware and Eject Media before removing the USB device.
  • Turn off the computer properly. To shut down your computer, you should click the Start button and click Shut down instead of pressing the power button directly.

3. Create a new local user account

If the Access Denied problem is due to a corrupted account, you can resolve the problem by creating a new local user account / profile. To create a new account, follow the steps below:

Step 1 . Click the Start menu and select Settings . Click Accounts in Windows Settings.

Step 2 . Select Family & other people on the left and then click on Add someone else to this PC .

Step 3 . Click on the link I do not have this person’s sign-in information and click on Next . On the next screen, click Add a user account without a Microsoft , then select Next . You can now enter your username, password, password hint and select Next .

Issue 4: Receive the error message “Location is not available. Access is denied “

Error message Location is not available. Access is denied

When opening a partition on a computer hard drive or USB device, you can not open it and receive the error:

  • “Location is not available. E: \ is not accessible. Access is denied” (Not available.

The cause of the Location error is not available. Access is denied

  • The file system is corrupted. The file system on the drive is corrupt and therefore inaccessible.
  • You do not have the appropriate rights.

How to fix Location is not available. Access is denied

1. Change the permissions for the drive

Step 1 . In Windows Explorer, right click on the partition you can not access and click Properties> Security> Advanced .

Step 2 . Click on Add in Advanced Security Settings and on the next screen click on Select .

Step 3 . Enter your username and click OK . You can then choose the following:

Type: Allow
Applies to: This Folder, subfolder and files
Basic Permissions: Full Control

Step 4 . Click OK  and Apply to save the changes.

2. Recover data from inaccessible drives and format it

If the permissions change does not resolve the issue, you can recover data from inaccessible drives and format it to fix the problem. It’s easy to get data from no location and denied access. Here are the steps to recover data from a corrupted disk.

Step 1. Install and launch Eassos PartitionGuru, then check if the partition is live or not. If not, move on to the next step.

Step 2. Select the unreachable drive and click the File Recovery button from the toolbar. Make sure you select the correct partition.

Step 3. Select Complete Recovery mode and click the Start button to start the scanning of files and folders in the selected partition.

Step 4. Preview the file. The files found by Eassos PartitionGuru will automatically be displayed during the scan and you can preview the files and folders listed to check if these files are corrupted.

Step 5 . Data recovery. Select the files and folders you want to restore and right-click them to select Copy to, then you can choose the location to save the restore data.

Problem 5: Accesss Denied Error when using DiskPart

Access Denied error message when using DiskPart

When using DiskPart to clean the drive, you can not do it and receive an error message: 

  • “DISKPART> clean”
  • “DiskPart has encountered an error: Access is denied” (DiskPart error occurred: Access denied). 
  • See the event log for more information. 

What causes Accesss Denied error when using DiskPart

  • You are not authorized.
  • The device you want to clean in Write Protection mode.  

How to fix Accesss Denied when using DiskPart

1. Run Command Prompt as Administrator

Step 1 . Log on to the computer with the administrator account. If not, restart the computer and access the administrator account.

Step 2 . Click the Start menu and type cmd into the search box.

Step 3 . Right-click “cmd.exe” and select Run as administrator. If prompted for a password or confirmation, follow the instructions.

2. Write Protection 

Step 1 . Click Windows + R to open the Run, type regedit and click OK to open the Registry Editor.

Step 2 . In Registry Editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Step 3 . Right-click on WriteProtect and change the position to 0.