To get a new IP address, users usually use the ipconfig/ renew command on the Command Prompt. But on some computers the status can not be refreshed IP and can not renew IP address on Windows. If this is the case, you need to fix the Can not renew IP address on Windows in the simplest way.
As you know, if the computer encounters an IP conflict condition we need to refresh the IP address to fix it. However, many users are again unable to use ipconfig /renew to refresh the IP address. If you can not renew the IP address on Windows, you must correct this error to resolve the IP conflict on the computer. Or you have to troubleshoot IP conflicts on your computer by setting up a static IP address. However, Taimienphi.vn recommends that you simply follow the instructions below to fix the Can not renew IP address error on Windows first.
How to fix Can not renew IP address on Windows:
Step 1: Click the Internet icon in the left corner of the desktop, select Open Network and Sharing Center.
Step 2: In the Open Network and Sharing Center, select Change Adapter Settings.
Step 3: Select the connection and right-click> Properties.
Step 4: Select the Internet Protocol Version (TCP/IPv4) and click Properties to open the Change DNS server.
Step 5: At this step you mark Obtain an IP address automatically and Obtain DNS server address automatically.
Finally, click OK to save the action you just made.
Once you’ve fixed the problem, you can verify that the ipconfig /renew command is working properly by following these steps.
Click Start, find cmd and right click on this tool, choose Run as Adminitrastor.
Enter ipconfig /renew command into Command Prompt and press Enter to run this command.
When the command was run as shown in the picture, you fixed the Can not renew IP address on Windows.
After viewing these instructions, you will see Can not renew the IP address on Windows is very simple, you only need to switch to dynamic IP only.